Continuous Simulation Modeling for Sewer Systems
The peaking-factor method of sanitary sewer design was developed to simplify the calculations in determining design flow rates. This method of analysis is conservative to the point that...
Case Study: Storm Water Analysis of Manatee Pocket in Martin County, Florida
storm water pollutant loading rates from a 6,000 acre urban watershed were analyzed for source determination of contamination to the receiving water. The receiving water body, Manatee...
Managing Stormwater with a Microcontroller Operated System
Concepts of managing urban stormwater runoff with a microcontroller operated flow control system are presented. The microcontroller system allows flexible and precise flow control from...
Assessment and Mitigation for Endangered Vernal Pool Invertebrates
The USFWS is considering declaring five species of vernal pool invertebrates endangered. Among these are the Vernal Pool Fairy Shrimp (Branchinecta lynchi), the California Linderiella...
Alternatives Analysis Using Two-Dimensional Modeling for the Owensboro Bridge and Approaches
The Federal Highway Administration plans to design and construct a new bridge over the Ohio River near Owensboro Kentucky. A hydraulic model with two-dimensional capabilities was utilized....
Urban Runoff and the Environment
This paper discusses complex water quality problems, including management of urban runoff. Mathematical modelling is used to asses runoff quantity and quality. Environmental impact...
Impact of Spatial and Temporal Data Limitations on the Modeling of Runoff Quantity and Quality
A small subbasin within an urbanized watershed (Reno, Nevada) was intensively monitored for runoff quantity and quality. The EPA Stormwater Management Model (SWMM) was applied to simulate...
Projecting Customers Using a GIS Land Use Forecasting Model
The Salt River project originally developed the Land Use Forecasting Model to understand the pattern of urbanization of agricultural and desert land in metropolitan Phoenix. The model...
A Structural Analysis System
In this paper, the importance of the structural analysis in accordance with the construction progress was emphasized to accurately predict the structural behavior of prestressed concrete...
Computer Analysis of Cable-Stayed & Suspension Bridges
The finite element structural analysis of long span bridges is an area of research that has been studied within the past thirty years since the development and emergence of the digital...
Modeling Beam Torsion in Prestressed Concrete Box Beam Bridges
This paper briefly summarizes the development of a specialized finite element model capable of predicting the elastic and inelastic behavior of beam-slab type prestressed concrete spread...
Time-Dependent Nonlinear Analysis of Cable-Supported Prestressed Concrete Bridges
A method of analysis and a computer program CFRAME for the material and geometric nonlinear analysis of cable-supported planar prestressed concrete bridges including the time-dependent...
F. E. Everett Turnpike: An Application of MOSS
MOSS surface modeling software is being used successfully by Fay, Spofford & Thorndike, Inc., on a major project for the New Hampshire Department of Transportation to make improvements...
NOISE?A Comprehensive Software Library for Highway Noise Analysis
The Noise Software Library is a collection of highway noise analysis software tools that are arranged together under a powerful file management system which provides a transparent method...
The 3D Approach to Design
Designing directly in three dimensions, including integrated analysis and information flow, is a powerful way to enhance civil engineering capabilities. Yet, relatively few have taken...
Designing in Three Dimensions for Manufacturing Facilities
Du Pont Engineering is using Three-Dimensional Design for the design of our manufacturing facilities. Our 3D design system was used on several projects in 1992, and full implementation...
A Stochastic Cost Engineering System (SCENS) Applied to Estimating and Tendering for Bill of Quantities Contracts
In many countries, contracts based on bill of quantities are very common in construction industry. Although estimating and tendering are overwhelmed by uncertainties, the common practice...
Computing with Objects: What Does Industry Hope to Gain from it
Although the need for an integration of engineering tasks has been stressed for a long time, the success that we see in this regard is very limited. We believe that there is justified...
A CAD-Based Construction Simulation Tool Kit for Construction Planning
Current planning and scheduling techniques place considerable reliance on the planners judgement, imagination and intuition. The result of such techniques is typically lengthy text reports...
Knowledge and Information Processing with Drawing Objects in Construction Phase
Knowledge processing by CAD systems poses challenging problems for the efficient integration of design and construction processes. While CAD systems have been applied to various phases...
Return to search