Local Integration Method in Stochastic Finite Element Analysis
This paper, introducing local integration method, proposes a new stochastic finite element method for estimating the response variability of multi-dimensional stochastic systems. Young's...
Galerkin-Based Response Surface Approach for Reliability Analysis
A new method for structural reliability analysis is presented. The method relies on an efficient algorithm for approximating the response surface of engineering structures. Unlike methods...
Stochastic Finite Element Analysis of Metal Plate Connected Wood Trusses
A stochastic finite element approach is developed for use in ananlyzing metal plate connected wood trusses. The procedure uses linear beam-column elements to model the wood members. The...
Response Analysis of an Elasto-Plastic System Under Nonstationary Random Input
This study presents that the variance of cumulative plastic deformation of a simple elasto-plastic structure under seismic excitation can be estimated in a relatively simple theoretical...
Expected Failure Time of Fiber Bundle Systems Subject to Gaussian Load Processes
Methods are developed for estimating the reliability and failure time of Daniels systems subject to Gaussian load processes. These systems consist of a set of parallel fibers and can carry...
Envelope Crossing Rate and First Passage Probability
Various definitions of the envelope of a random response process are discussed. The statistical properties of the random envelope process based on these definitions are then derived and...
Response Variability of Isolated Structure Due to Randomness of Isolation Devices
Effect of randomness of restoring characteristics of an isolation device, which is considered to result from the randomness of material properties, configuration and setting error, on...
Reliability of Control Systems of Building Structures by Active Tendons
In this paper, a numerical assessment on the reliability of a control system of building structures by active cables is performed. Some control experiments on a 23-story shear-wall building...
Safety Evaluation of a Tall Building
This paper uses the extended Kalman filter to perform the system identification of a tall building with the aid of recorded accelerograms obtained from strong-motion seismographs. The...
Effect of Microporosity on Notched Specimen Fatigue Life
The present work examines notched fatigue performance of aluminum alloy 7050-T7451 thick plate containing microporosity. Open hole fatigue specimens from low microporosity and high microporosity...
Application of Probabilistic Approach for Crack Growth Damage Accumulation in Metallic Structures
Two stochastic crack growth approaches (i.e., 'general' and 'analytical') are presented and evaluated for predicting the crack growth...
Potential Applicability of Mathematical Statistics in Stochastic Modelling of Failure Phenomena
Failure phenomena should be investigated clearly with a good understanding of engineering uncertainties associated with strength of the material as well as randomly applied load. In this...
Fatigue Reliability of Components Containing Microstructural Flaws
A probabilistic crack growth model is presented in which the different stages of crack growth including the small crack regime are taken into account. The microstructural parameter determining...
Probabilistic Analysis of the Ghonem and Dore Data
A two-state Markov process model for fatigue crack growth is utilized with experimental fatigue crack growth data reported by H. Ghonem and S. Dore to study the effect of stress ratio...
Diffusion Models of Fatigue Crack Growth with Sequence Effects Due to Stationary Random Loads
A new fatigue crack growth model that includes load sequence effects is formulated. This model includes a load history dependent parameter, the reset stress, which reflects the state of...
Analysis of Fatigue Crack Propagation Under Random Loading by Markov Chain
Fatigue crack propagation is simulated in terms of a discrete Markov process considering both the randomness of crack propagation resistance and the randomness of external loading, which...
Statistical Fatigue Properties of Carbon Steels for Machine Structural Use Based on JSMS Database on Fatigue Strength of Metallic Materials
A database on the fatigue strength of metallic materials was compiled by collecting the experimental fatigue data of the last 20 years in Japan on a nationwide scale as a joint project...
Distribution of Variance of Fatigue Lives of Ferrous Metals by the Analysis of Fatigue Strength Database
The purpose of this study is to determine the distribution characteristics of variance of fatigue lives of carbon and alloy steels, especially from the viewpoint of their dependence on...
Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...
Damage Process of Composite Material with Randomly Oriented Fibers
A numerical procedure is formulated to make clear the damage process of composite materials with randomly oriented fibers. These composites often have complicated fiber oriented states,...
Return to search