Building Failures: Design Problems and Solutions
A Building Failures conference of the Engineering Foundation dissected the problems leading to failures and recommended ways to reduce failures. This article discusses value engineering,...
Seismic Design for Sacramento Light Rail Transit System
The Sacramento Light Rail Transit Project is an 18. 5 mile system which provides the trunk line service for an integrated Bus/LRT public transportation system. Seismic design utilized...
Seismic Design of Airport Control Towers
The paper describes state-of-the-art design in seismically active areas. It includes a review of current code design parameters and specific tower design criteria. Tower design examples...
An Overview of Earthquake Design Requirements at Pacific Bell
Seismic design considerations for the telephone system including outside plant and telephone equipment are discussed with emphasis placed on the requirements incorporated in the design...
Dome
Roofed with the worlds largest diameter wood dome at 530 ft., the Tacoma Dome, a multi-purpose sports and convention center has helped revitalize a blighted part of that Washington state...
Energy Recovery
In Albany, N.Y. the state and city cooperated in designing and building a refuse-into-steam energy plant that has several unique features. In most such facilities, the entire plant is...
Coupled Vertical-Rocking Response of Base-Isolated Structures
A base-isolated building can have a small horizontal eccentricity between the center of mass of the superstructure and the center of rigidity of the supporting bearings. The structure...
Evaluation of the Ultimate Pressure Capacity of Rectangular HVAC Ducts for Nuclear Power Plants
Structural design criteria are presently based on the AISI Code which limits the duct panel width-to-thickness ratio to a maximum of 500 and the maximum height-to-thickness ratio to 200,...
The Present Status of Application of the Plastic Concepts in Structural Design
The different approaches of recognizing plastic behavior in the design of steel structures are reviewed and the design requirements that assure successful utilization of this behavior...
Probing the Past
In Denver, Colorado, 12 buildings of an old abandoned brewery complex were to be renovated into a 270,000 sq ft shopping, entertainment and restaurant complex. Rather than conduct a thorough...
Evaluating Data Collectors as a Surveying Tool
Data collectors play an increasingly important role in surveying. The data collector serves as an interface between the total station and the computer and as an electronic assistant to...
A Structural Engineering Perspective for Drilled Shafts
This commentary is an attempt to close the gap between the Building Code Requirements for Reinforced Concrete (ACE 318-83) and the design of drilled shafts. The context of design includes...
Planning of CAE and CADD Centers
The factors to be considered prior to the establishment of computer aided engineering or computer aided design and drafting centers are discussed. It is noted that the critical issues...
Trends in Computerization in the Eighties
This paper addresses trends in computer-aided productivity tools for Civil Engineers in the eighties. Certain aspects of the past history, present status, and future of CAD/CAM and CAE...
Repairing New York's Historic Bridges
The Brooklyn and Manhattan bridges are just two of New York City's venerable structures that are undergoing rehabilitation. Current work on the Brooklyn involves enlarging...
Charlotte Harbor Beach Nourishment
The project consisted of dredging approximately 300,000 cubic yards (229, 380 cubic meters) of material, utilizing a seagoing hopper dredge, from the entrance channel of Charlotte Harbor,...
Management Plan for Dredged Maintenance Material
The Mobile District Corps of Engineers is responsible for the maintenance of an authorized Federal deep-draft navigation project at Pascagoula Harbor, Mississippi. The development of the...
The Need for Training in the Dredging Industry
Training is very important in those cases where the skill of personnel is not adequate to make optimal use of dredging equipment. This holds for management staff as well as for operating...
Long-Term Planning for Dredged Material Disposal
The dredged material produced from maintenance of the channel in Upper Mobile Harbor (UMH) is disposed into confined upland disposal areas provided by the project's local...
Long-Term Maintenance Dredging Permits - Florida's New Approach to Regulation
Previous approaches to regulating maintenance dredging activities in Florida generally have been myopic and failed to gather information that adequately reflects the needs for environmental...
Return to search