ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Detecting the Twin Vortex Draft Tube Surge
Experiments were performed to investigate a twin vortex draft tube surge in a homologous model and the prototype 700-MW turbines installed at the U.S. Bureau of Reclamation's...

Model Study of a Hurricane Surge Barrier Gate Valve
Physical model studies were conducted to determine the hydraulic performance of a unique vertical butterfly-gated structure. These studies were also used to determine the torque on the...

Model Studies of Outlet and Intake at McCook Reservoir
Two separate physical models were used to investigate the outflow and inflow into the proposed McCook Reservoir. The proposed reservoir will be located in McCook, Illinois, and will serve...

Loose Riprap Grade Control Structure Design
The Soil Conservation Service has been using loose riprap grade control structures based on the equal energy concept for several years with mixed success. Previous model studies resulted...

Vortex at Hydraulic Intakes with Asymmetric Approach Flows
The formation of vortices at intakes can disrupt normal operating procedures and damage hydraulic machinery. Asymmetric approach flow and a protruding pier (normal wall) contribute to...

Application of a Geographic Information System to Estuarine Hydrodynamic Modeling
A geographic information system has been used in a hydrodynamic study of Albemarle Sound, North Carolina, to provide an efficient means for spatial data organization, information display,...

G.I.S. Applications in Nonpoint Source Pollution Assessment
A Geographic Information System (GIS) provides a flexible tool for developing the oftentimes cumbersome soils and land use mapping database required in watershed storm water management...

Two-Dimensional Hydrodynamic Modeling of a Reach of the Mississippi River in Pool 19
A depth-integrated finite-element model (RMA-2V) was applied on a section of the Upper Mississippi River to study the hydraulic characteristics of the floodplain-river system. The area...

Verification of Clark County Hydrologic Modeling
The Clark County Regional Flood Control District, which includes the Las Vegas, Nevada metropolitan area, has recently adopted hydrologic criteria which are intended to standardize the...

A Dynamic Runoff Model for Disturbed Hillslopes
A dynamic runoff model is developed for use in analyzing the hydrologic response of disturbed hillslopes. The model employs an explicit form of the Green-Ampt equation which is coupled...

Reliability Assessment Method for Flood Forecasts
Peak discharge predictions produced by rainfall-runoff models and used by flood warning and preparedness agencies are subject to uncertainties in the input data, model parameters, and...

Measurements to Calibrate Suspended Sediment Model for Adsorbed Contaminant Transport Study of North Fork Holston River, Virginia
A daily suspended sediment (SS) and mercury transport model was developed for a 25-mile reach of the North Fork Holston River below Saltville, Virginia. Daily streamflow measurements;...

Modeling of Dispersion in Natural Streams with Pools and Riffles
The non-Fickian nature of the dispersion process in natural channels with pools and riffles has been investigated through both laboratory experiments and the numerical solution of a proposed...

Verification of WASURO Using the Puerto Nuevo Physical Model Study Results
The Jacksonville District, US Army Corps of Engineers, used the hydraulic design computer modeling program, WASURO, for preliminary design of the Rio Puerto Nuevo Flood Control System....

Combined Application of HEC-1 and HEC-2 Simulation Models in Dike Safety Analysis
The potential flood impact of a breach in a dike for a large spreading-area on a nearby waste storage facility was investigated. An HEC-1 model was used for generating breach hydrographs...

Rainfall-Runoff Modeling in a Small Urban Watershed
Knights Branch watershed is located in Dallas, Texas, and it covers an area of about 5 mi² (13 km²). Due to...

An Engineering Analysis of Sedimentation in Tidal Inlets
The engineering comparative analysis of deposition and scour of noncohesive sediments in the neighborhood of bridges over tidal inlets is a unique problem which does not lend itself conveniently...

Model Studies on Local Scour
In this investigation, the scaling procedure of a scour model in the laboratory has been indicated. The results have been compared with the prototype data....

Cofferdam Rip-Rap Protection for the New Esna Barrage
A 1:60 undistorted mobile bed model of the Nile River in the vicinity of Esna Barrage was constructed at the Hydraulics and Sediment Research Institute to test rip-rap protection of the...

Calibration of Beni-Mazar Movable Bed Model
A sand-bed model representing a reach of the Nile River was constructed to study alternative solutions to maintaining the navigation channel. Flume tests were carried out first to determine...

 

 

 

 

Return to search