Coupling Free Vortex Energy Dissipation with Sediment Control
The paper reports on studies showing that sediment control down to the abrasive limit of 30 micron sand and energy dissipation can be achieved simultaneously with a Teacup free vortex...
Behavior of Sediment-Laden Plumes on Steep Slopes
The near field behavior of dense, sediment-laden flows on steep slopes was investigated as part of a study of mine tailings disposal. A literature review indicated that field and laboratory...
Water Requirements for Range Plant Establishment
A conceptual model was developed which describes a series of pathways or transition sequences which a seed or seedling may follow during the initial wet-dry-wet periods after planting....
Dredged Material Disposal in the Lower Great Lakes
The Buffalo District Corps of Engineers is responsible for dredging the harbors in Lakes Erie and Ontario. Approximately 2,000,000 cubic yards (1,529,000 cubic meters) of material are...
Modification of the Step Drawdown Test for Pump Selection
This paper suggests a slightly modified mathematical model for pump tests whose aim is to design the correct pump for a well. The advantage of the model presented is that it incorporates...
Water Quality and Hydrodynamics in a Shallow Lake
Hydrodynamics and water quality are closely coupled in a shallow lake via horizontal transport and sediment resuspension. The latter process is examined thru modeling and in situ field...
Submerged Vanes for Sediment Control in Rivers
A procedure is developed for a rational design of a system of submerged vanes for depth control in alluvial-river channels. The vanes are vertical, small-aspect ratio foils installed on...
Laboratory Model Studies of Flood Wave Propagation
Laboratory investigations of unsteady free-surface flow with various combinations of channel and flood conditions were performed. A 72 ft (21. 9 m) long tilting flume was modified to make...
Analysis of Freshwater Distribution System at the Long Beach Naval Complex
This account of the evaluation of freshwater pipelines at California's Long Beach Naval Complex discusses current methods for assessing the condition of damaged water lines....
Production Analysis of the Cat 245 Hydraulic Hoe
The productivity of two Caterpillar model 245 hydraulic backhoe excavators was analyzed during their use on a highway construction project in September 1983. The hoes were working in a...
Use of Nondestructive Testing in Rehabilitation of Wood Cooling Towers
State-of-the-art nondestructive evaluation (NDE) techniques, destructive testing, structural analysis, degradation rate models and statistical analysis are combined to optimize a major...
Nondestructive Evaluation of Timber Bridge Piles
A nondestructive technique for the determination of the in-place strength of timber bridge piling is presented herein. The testing technique is the ultrasonic wave propagation method in...
Rapid Assessment of Seismic Vulnerability
The choice of a seismic damage assessment method depends fundamentally on how the assessment will be used, but always involves definition of the expected ground motion and the structure...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Evaluation of the Seismic Performance of Buildings
The aim of the paper is to present the different existing methodologies available for the assessment of seismic damage to buildings. The approach aims towards the development of a mini-computer...
Techniques for Estimating Earthquake Probable Loss for Buildings and Contents
The probable maximum loss (PML) is useful for quantifing the seismic risk exposure of a facility and for rational decision making regarding earthquake insurance and seismic strengthening...
Rapid Identification of High Risk Building in Seismic Regions Using Expert Systems
Seismic risk evaluation is a complex problem because it involves many factors such as ground motion, ground failure potential and structural performance with great uncertainties. Many...
Seismic Risk Analysis of a Multi-Site Portfolio of Buildings
A discussion of a methodology that permits the assessment of the seismic risk associated with a group of buildings and incorporates relevant aspects of seismic hazard assessment including...
Use of In Situ Tests in Geotechnical Engineering
In the past ten years, many new types of in situ test equipment and many new techniques have been developed. The papers in this volume are concerned with applications of in situ measurement...
Seismic Response of Pipes Supported on Complex Frames
Analytical approaches and modeling techniques used to calculate seismic responses of piping systems, supported on complex open-frame structures, are evaluated. Seismic responses are obtained...
Return to search