Reliability of Geometrically Nonlinear Structures
A procedure for first- and second-order, finite-element reliability analysis of geometrically nonlinear structures under static loads is presented. Structures are either linear or nonlinear...
Multicriterion Reliability-Based Optimization of Structural Systems
The optimization of nondeterministic structural systems under random loads is currently performed by single-criterion reliability-based optimization methods. However, in structural design...
Analysis of Bridge Truck Loads
The development of the reliability-based load and resistance factor design (LRFD) methodology requires uncertainties in loads and resistance be quantified. In the load capacity evaluation...
Damage Accumulation Models for Bridges
In the study summarized in this paper the serviceability and ultimate limit states were reviewed for concrete and steel girder bridges. A model is proposed to evaluate strength and remaining...
Research Needs for Rational LRFD Criteria
There are at least a dozen factors causing or influencing impact. Current design specifications consider only a few of these. Location of truck wheel loads within the traffic lanes on...
Recursive Modeling of Dynamic Response of MDOF Systems
The dynamic response of multi-degree-of-freedom (MDOF) systems to correlated multi-input random excitations utilizing recursive modeling is presented. The recursive model is formulated...
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Bridge Repairs?Unexpected Effects on Reliability
There is a significant probability that a bridge will require repairs at some time during its service life. Repairs correcting one deficiency can cause other, unanticipated problems. Awareness...
System Reliability Under Time Varying Load
The reliability of ductile and brittle structural systems under time varying loads is investigated. The formulation in the context of outcrossing of a vector process is examined. A new...
Reliability Methods for Steel Members Subjected to Axial Load and Moment
There has been a significant amount of research performed on determining the reliability of elastic-plastic frames where failure is through the formation of a plastic collapse mechanism....
Statistical Analysis of Occupant Dynamic Loads
Human-induced load-time histories were modeled by several dependent descriptive parameters. These parameters were treated as functions of two independent variables in a multivariate regression...
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Pressures on Prisms in Turbulent Shear Flows
Experimental results are presented which show that Melbourne's 'Small Scale Spectral Density Parameter,' S, controls the negative pressures on the...
Dynamic Response of Tall Buildings to Wind Loads
The purpose of this study is to perform a probabilistic analysis of tall buildings subjected to wind excitation. A time domain simulation is first applied to the nonlinear problem. After...
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Probabilistic Structural Response of a Turbopump Blade to Random Pulse Loading
The objective of this work is to develop probabilistic models of the response of a Space Shuttle Main Engine (SSME) turbopump blade to random impact loading. These loads are caused by...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Return to search