Spillway Gates for the El Naranjero Dam in Spain
In June 1986 Zwag Zschokke Wartmann Ltd received the order from Hidroelectrica Espanola S.A. in Madrid, Spain for the design and model testing of 5 radial gates on the 'El...
Diversion Closure Gate Schemes Used on B.C. Hydro Dams
Over the last 25 years B.C. Hydro has designed, built and has operated a number of large dams and continues to do so. This paper describes the design, erection and operating experiences...
Instability of Water-Fluid Mud Interface
Erosion and entrainment of fluid mud are treated by means of shear flow analysis. The water-fluid mud system is considered as a layered system of two continua separated by a distinct interface...
Horizontal Density-Gradient Effects on Simulation of Flow and Transport in the Potomac Estuary
A two-dimensional, depth-integrated, hydrodynamic/transport model of the Potomac Estuary between Indian Head and Morgantown, Md., has been extended to include treatment of baroclinic forcing...
Slurry Removal From a 2-D Fluidized Region
A two-dimensional fluidization experiment is performed on fine sand with a 5.08 cm diameter source pipe with horizontally opposed orifices, 0.317 cm in diameter, spaced 5.08 cm. Slurry...
A Study on Estimation of Aquifer Parameters in Unsteady Seepage Flow
A method which automatically identifies aquifer parameters is proposed in this paper. The aim of this investigations is to estimate transmissivities and storage coefficients of unsteady...
3-D Cavity Flow Analysis by a New Fractional Step Method Based on the Finite Element Method
This paper describes a new finite element scheme for solving the time-dependent incompressible viscous fluid flow expressed in terms of the Navier-Stokes equations. The main feature of...
Long-Term Numerical Simulation of Three-Dimensional Hydrodynamics of Chesapeake Bay
A time-varying 3D numerical model of Chesapeake Bay has been developed to provide flow fields to a 3D water quality model of the bay. The water surface, 3D velocity field, salinity, and...
An Acoustic Doppler Discharge-Measurement System
A discharge-measurement system that uses a vessel-mounted acoustic Doppler current profiler has been developed and tested by the U.S. Geological Survey. Discharge measurements using the...
Effects of Turbulence on Price AA Meter Rotors
Field and laboratory studies were conducted during 1988 and 1989 by the U.S. Geological survey to determine the effect of turbulence on the performance of price AA meter rotors. Two different...
Limitation to Standard Parshall Flume Calibrations
Parshall flumes are widely used for metering open channel flows. An inspection of the original study which developed the rating equations indicates that the flumes were not tested for...
The Stacked Drift Tunnel
The Mount Baker Ridge Tunnel is the first of its kind and the last: a forward thrust of technology and a look back to the flow of federal highway funds, which paid 90% of its cost. The...
Closing The Floodgates
The White Rock Creek basin in Dallas and Collin Counties, is one of Texas' most crucial resources. While large tracts of undeveloped land in Collin County remain under agricultural or...
Top Projects 1990
A dam, a bridge, an expressway, an interchange, flood control improvements, wastewater treatment and a dredged material containment embankment round out the 1990 Outstanding Civil Engineering...
Lower Granite Fish Guidance Efficiency System Model Study?Snake River, Washington
With the annual migration of adult salmon up the Columbia and Snake Rivers and the migration of their offspring (juvenile salmon) downstream to the ocean, new problems have developed with...
Selection of Hole Size for Fluidization Pipes
Two-dimensional fluidization experiments are performed on fine and medium coarse quartz sands at depths of 25.4 and 42 cm. Four supply pipes are used with orifice diameters of 1.587 mm...
A Semi-Empirical Model for an OC-OTEC Spout Flash Evaporator
A phenomenological model for the thermal-hydraulics of a spout flash evaporator is presented in this paper. The model considers the two-phase flow behavior both in the spout and in the...
Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...
Resin Transfer Process Modelling: Computational & Experimental
In most cases, the resin transfer molding (RTM) researcher has a fundamental understanding of composites and possibly some mold design experience. The areas of resin flow dynamics and...
Significance of Yield Surface Corner-Like Effects in Inelastic Stability Solutions
This paper presents the author's experiences with finite element prediction of the inelastic stability of steel plate structures. The implications of linear versus nonlinear...
Return to search