Sediment Routing and Stream Bed Evolution Model
A one-dimensional numerical model developed by Borah, Alonso and Prasad is discussed, improved and tested. The model named STREAM routes graded sediments and simulates aggradation, degradation...
Ackers-White Equation: Transportation by Size Fractions
The Ackers-White procedure for sediment transport has been modified to permit calculation by size fractions. The original logic has been retained, but A values for incipient motion have...
The Inflatable Weir and Its Widespread Employment for Irrigation in Japan
Although introduced in the U. S. in the 1950's for groundwater recharging, the inflatable weir has become established only in Japan, in which case it is used almost entirely...
Laboratory and Field Determined Seepage (
In order to obtain quick and reliable estimates of seepage, an attempt was made to establish a relationship between one or more of the properties of concrete canal lining and seepage....
Lights Out at Caribou
The Caribou powerplant restoration is one of the projects to receive an Outstanding Civil Engineering Achievement Award of Merit. On February 24, 1984 a rock slide on the ridge above the...
Garbage: Cogeneration's Third Dimension
Burning garbage or refuse derived fuels (RDF) is becoming more common in cogeneration plants being constructed in the U.S. The three-for-one concept turns one fuel into two products (steam...
Development and Use of Stress Laminated Timber Deck Bridges
This presentation provides a brief overview of the concepts, development, research needs, economics and recent use of stress laminated timber bridge decks. Repeated articles on the serious...
Micro=Lam? LVL: A New Alternative for Timber Bridges
Laminated veneer lumber (LVL) provides a unique opportunity to obtain large structural members from ever-smaller trees. It provides the added benefit of high treatability. This paper explains...
Evaluation of Stormwater Management Structures in Maryland Proportioned by SCS TR-55
Various state and local agencies in Maryland are requiring that the Soil Conservation Service Technical Release 55 be used to evaluate impact of urbanization on peak rates of discharge....
Probabilistic Models of Fatigue Crack Growth
The reliability of a structure against metal fatigue is a problem that has been of concern to engineers for a very long time. This problem was one of the first to be approached probabilistically,...
Applications of Fiber Bundle Model to Structural Engineering
The bundle failure time has been studied extensively for both deterministic and random loads. The objective of this paper is to apply results in these studies to the dynamic analysis of...
Lateral Impedance of Contact Pile Foundations
The static and dynamic lateral impedance of pile foundations for which there is continuous contact between the bottom of the pilecap and the underlying soil is investigated. A parametric...
Rational Design Approach for Tension on the Net Section
A study of the bearing and net section capacities of bolt connections for material thicknesses encountered in cold-formed members was conducted. This paper summarizes the findings as they...
Bending Strength of Thin Cold-Formed Steel Straight Panels
An experimental investigation on the bending strength of 26 gage cold-formed corrugated steel straight panels with web-depth to thickness (h/t) ratio of 475 is presented. A typical test...
Behavior and Design of Semi-Rigid Composite Frames
Recent advances and experimental research on the behavior of composite semi-rigid frames indicates that substantial savings can be achieved with this method of construction. The current...
Comparison of the Third and Fourth Edition of the Guide: What is New and Different
The fourth edition of the 'Guide to Stability Design Criteria for Metal Structures' is a unique collection of ideas and information on stability problems. It...
Centrally Loaded Columns
The paper has given a detailed description of the chapter on centrally loaded columns that will appear in the 4th Edition of the Structural Stability Research Council 'Guide...
Modeling Errors in Fatigue Crack Growth Laws
Using the fracture mechanics approach to fatigue it is possible to update estimates of a structure's reliability against fatigue failure given new information on the state...
Fracture-Mechanics-Based Fatigue Life Estimate
Fatigue lives of tee-shaped weldments are estimated using fracture mechanics concepts and crack growth rate data. Fracture mechanics is used to develop an approximate expression for stress...
Aluminum Orthotropic Bridge Deck Verification
This paper reports tests conducted to evaluate an aluminum orthotropic deck. Approximately 60 welded T-joints with 6061-T6 stems and 5456-H321 plate were subjected to flexural fatigue...
Return to search