Response Variability and Reliability of Plates Using the Weighted Integral Method
A methodology is introduced to perform both the response variability and reliability analysis of two-dimensional stochastic systems (specifically plates subjected to plane stress or plane...

Stochastic Finite Elements and Reliability Analysis
A general - purpose approach for assessing the reliability of a nonlinear mechanical system under stochastic conditions was presented in (Faravelli, 1991). It combines the skeleton of...

Stochastic Dynamics of Hysteretic Systems
A frequency domain method is discussed in order to evaluate the second order statistical response of nonlinear hysteretic structures. Both shear type systems and lumped mass frames involving...

Structural Reliability of Seismic Isolation System
Seismic reliability analysis of isolated structure is conducted. In this study focused on are bearing capacity of isolation layer considering strength randomness of isolation bearings...

A Coordinate Reduction Technique With Mass Correction for Dynamic Analysis of Structural Systems
A more accurate technique which can be applied for reducing the order of system matrices when employing the finite element method (FEM) is presented. Unlike traditional reduction techniques,...

A Selective MC Simulation Technique for Nonlinear Structural Reliability Assessment
A selective Monte Carlo simulation (MCS) procedure for the evaluation of the reliability of nonlinear structures subjected to dynamic random loading is presented. The proposed 'double...

Reliability-Based Specification for Engineered Wood Construction
A three-year, industry-sponsored effort has resulted in the development of a reliability-based, load and resistance factor design (LRFD) Specification for wood construction. Improvements...

Load Duration and System Effects in LRFD for Wood Construction
The wood industry is developing a Load and Resistance Factor Design (LRFD) speciification for wood construction using probabilistic concepts. An analysis based on statistical models for...

International Harmonization of Reliability-Based Timber Engineering Design Codes
An overview is presented on reliability-based timber design code activities in various major timber producing and consuming countries. The overview is based on information generated through...

Reliability-Centered Management of Wood Transmission Lines
Through implementing reliability-centered management concepts, more cost-effective management of wood pole transmission lines may be achieved. By identifying individual structures and...

Asymptotic Importance Sampling
One of the main issues in reliability analysis is the accurate and efficient calculation of the multivariate reliability integral. The Asymptotic Importance Sampling Technique (AIS) selects...

Sampling Techniques for Time-Variant Reliability Problems
Time-variant structural reliability problems arise when the structural resistance may change with time (such as in structural deterioration) or when the system is acted upon by two or...

A Unified Simulation Approach to Structural System Reliability Analysis
To determine accurate estimates for the system reliability of large complex structures requires considerable computation; unless the problem is assessed in an efficient manner the analysis...

Comparison of Some Importance Sampling Techniques in Structural Reliability
The approximate calculation of structural reliabilities by FORM/SORM is well known. Nevertheless, alternatives or at least methods with which the error by these methods can be quantified...

Use of Importance Sampling Constraints in System Optimization
An important application of system reliability analysis is to incorporate overall system risk as a constraint in a structural optimization. The paper describes the use of Monte Carlo Importance...

Updating of Dynamic Structural Systems by Learning
Many techniques have been developed to identify structural system parameters; however, they are generally restricted to parameter identification within the framework of an equivalent structure...

Dynamic Response of Uncertain Two-Dimensional Structures
A concept for the reliability analysis of structures with uncertain elastic and mass properties is presented. Its applicability is shown by means of a numerical example. The results are...

Vibration of a Bridge Under a Random Train of Moving Loads
The vibration of a beam resulting from the passage of moving loads is a problem of great importance in structural dynamics. A consistent model for the description of the loads acting on...

On the Approximated Solution of Non-Linear Systems Under Non Gaussian Excitations
The study of non-linear mechanical and structural systems under random excitations has become very important in the last years. When random excitations are Gaussian, many approaches can...

Random Vibration of the Viscoelastic Structure under Series of Stochastic Excitations
In the paper the vibration of viscoelastic single-degree-of-freedom system caused by a random series of pulses is considered. The linear rheological model for the creep law is assumed....

 

 

 

 

Return to search