Comparison of Shoreline Change Obtained with Physical and Numerical Models
This paper describes a study performed to compare numerical simulations of shoreline response to coastal structures to the response measured in a large wave basin. Two cases are modeled...
Development of an Input Data Set for Shoreline Change Modeling
Procedures and analysis techniques for pre-processing physical data sets in preparation for performing a numerical shoreline change simulation study using the GENESIS model are presented....
Field Application of a Numerical Model of Beach Topography Change
Discussion was made, on the basis of field data, on the applicability of the formula for local rate of sediment transport due to combined action of waves and currents presented by Watanabe...
Beach Profile Modelling: Flume Data Comparisons and Sensitivity Tests
Some results from a deterministic computational model of beach and nearshore profile development are presented in this paper. Comparisons are made with prototype-scale flume measurements...
Mathematical Model of Groyned Shingle Beaches
The paper describes the development of a mathematical model designed to be used by coastal engineers to study the effects of groynes on shingle beaches. The main task of the model is to...
The Use of Hydraulic and Mathematical Models for Designing a Small Artificial Beach
This paper presents a case study in which physical and mathematical models are used for determining the behavior of a small artificial beach under wave attack. The beach is protected by...
Development of Optimum Beach Fill Design Cross-Section
Accurate beach profile surveys, wave information, and sediment data taken at Ocean City, Maryland provided an opportunity to evaluate four beach fill design alternatives using the beach...
Sediment Budget at Oceanside, California, Calculated Using a Calibrated Shoreline Change Model
A quantitative sediment budget analysis was made for the shoreline segment extending from 4 miles north to 4 miles south of Oceanside Harbor using a calibrated shoreline change model....
PITTLEACH: A Numerical Model of Landfill Stabilization
This paper addresses the theoretical development, use and application of PITTLEACH, a computer program conceived to simulate the processes of landfill stabilization. Since the physical,...
An Evaluation of Area Source Dispersion Algorithms
The correct simulation of air pollutant dispersion from area sources of pollutants has presented some unique challenges to dispersion modelers. This study employs geometric tests and sensitivity...
Hydraulic Analysis of the Impacts of I/I on System Capacity
The USEPA Stormwater Management Model was used to evaluate the impact of infiltration and inflow on the separate sewer facilities of one of the largest sewage treatment districts in the...
Propositions for Packed Bed Adsorption Reactor Design
This paper states ten propositions which describe the behavior of 'wave fronts', i.e., adsorbate concentration versus distance profiles at given elapsed times,...
Screening Level Modeling in Support of an Estuarine Toxics Management Program
Mathematical models will be used in the future to determine maximum allowable pollutant loading rates for several toxics to the South San Francisco Bay Estuary. This project consisted...
Preliminary Investigation into Using Oxidation-Reduction Potential (ORP) for Real-Time Control of Aerobic-Anoxic Sludge Digesters
This research explores the use of Oxidation-Reduction Potential (ORP) to control an Aerobic-Anoxic Sludge Digestion Process. It compares a Fixed-Time Control reactor (3 hours of air on/3...
Biological Methods for Air Decontamination: Modeling Hydrocarbon Removal
Bench-scale tests indicate biofilter treatment of gasoline and diesel with activated carbon support media is first order, while removal of ethanol on compost is zero order. Treatment of...
Modeling Emissions from Aerobic Treatment Systems
A mathematical model has been developed specifically for accurately quantifying the dispersion of emissions in the near vicinity of a groundlevel area source. This model accounts for variations...
Assessment of Effects of a Water Supply Withdrawal on Downstream Flows for Anadromous Fish Reproduction
A BASIC computer model was developed to simulate reservoir operations in conjunction with a proposed water supply withdrawal. The model was used to assess the potential impacts of the...
Using Multiple Water Quality Models for Determining Variable Emission Levels for Wasteload Allocation
We present a methodology for determining the least-cost wasteload allocations from multiple point sources discharging into a single water body. The system of point sources is modeled as...
An Analysis of Modeling Techniques in Pollution Management of Natural Water Systems
This paper will focus on various models to demonstrate the difficulties with modeling techniques. The difficulty with developing a valid model for a system is explored through the study...
Information Entropy and Environmental Engineering
Environmental engineering decisions are often made with limited information. In such cases it is useful to express uncertain quantities with a probability distribution. The use of information...
Return to search