Achieving Accurate Irrigation Water Measurements with Propeller Meters
Propeller meters are now being used extensively to help quantify and manage the huge but poorly distributed water supplies available to irrigated agriculture in the western states. Careful...
Adjustment of Mountain Stream Channels to Flow Regime Alteration, Preliminary Analysis
One aspect of instream flow regimes being actively debated is the need for channel maintenance of flushing flows. However, little quantitative information exists as to how different types...
Instream fFlows for the Big Bend Reach of the Platte River
The Big Bend reach of the Platte River in Central Nebraska provides habitat for 230 species of migratory birds. Included are six endangered or threatened species and the world's...
Stable and Environmental Channel Design
The Wildcat and San Pablo Creeks Flood Control Project is located in Richmond, California. Both streams flow through a highly urbanized area, periodically overflowing their banks and causing...
Computer Aided Hydraulic Design of Open Channels
Over a 10 year period, the computer program, WASURO, was developed by the U.S. Army Corps of Engineers District, Los Angeles (LAD), which utilized many of the criteria of the previously...
Power Formula for Open-Channel Flow Resistance
This paper evaluates various power formulas for flow resistance in open channels. Unlike the logarithmic resistance equation that can be theoretically derived either from Prandtl's...
Flow Measurement Using a Digital Pressure-Time Method
This paper describes flow measurements performed by TVA's Engineering Laboratory as a part of absolute efficiency measurements of the two units at the Great Falls Hydro Plant....
Closed-Loop Control for Hydraulic Laboratory Operation
The implementation of Closed-Loop Feedback Control in the Bureau of Reclamation's Hydraulic Laboratory flow delivery system has provided an important new modeling tool for...
Instrumentation for a Dry-Pond Detention Study
A 12.3-acre, fully urbanized, residential land-use catchment was instrumented by the U. S. Geological Survey in Topeka, Kansas. Hydraulic instrumentation for flow measurement includes...
Applications of GSTARS Model
GSTARS is a Generalized Stream Tube model for Alluvial River Simulation. Depending on an engineer's need, GSTARS can be used as a fixed boundary as well as a movable boundary...
Toe Scour Protection in Open Channels
Scour at the toe of bank protection works is one of the major causes of failure of these structures. Weighted riprap toes are frequently used to prevent bank protection failure due to...
Design Depths and Velocities on Alluvial Fans
Under Federal Emergency Management Agency (FEMA) guidelines, flood depths and velocities on alluvial fans are determined by considering the probability of a given point on the alluvial...
Computations of High-Velocity Flows on Alluvial Fans
The results of numerical models of supercritical flows on alluvial fans demonstrate the strong effect fan topography has on flow velocity and depth. Particularly important are transverse...
Initiation of Density Currents in Diverging Channels: Comparison of Field and Laboratory Data
The transition from free surface channel flow to a submerged density current has been investigated in the laboratory. A set of field data has been collected at a wastewater effluent site....
An Alternate Theory of Density Current Propagation
Density current propagation has been previously analyzed by employing a one-dimensional momentum balance in a frame of reference moving with the density current head. Experimental data...
Interfacial Instabilities Associated with Density Currents
Three-dimensional behavior of density currents flowing down a sloping surface has been analytically and experimentally investigated. Attention has been given to the presence of interfacial...
An Inline Retarding Basin
This paper discusses the idea of retarding flows within existing right-of-way in a linear basin. This concept is based on longitudinally dividing the right-of-way into two sections. The...
Features of Flow in Slurry-Thickening Ponds
The study reported was undertaken to investigate the physical processes which come into play in settling-pond slurry thickeners and causes their behavior to deviate from those included...
Microstructure of Cohesive Sediment Suspensions
In a shear flow field suspended fine sediments under relatively low concentrations and stable stratification conditions develop a step-wise profile. This is due to internal wave instability...
Near-Bed Sediment Concentration in Non-Uniform Flows Over Gravel Beds
The calculation of near-bed sediment concentration is formulated in terms of equations governing the dispersion of heavy particles in non-uniform turbulent shear flows over stable gravel...
Return to search