Structural Considerations of Cellular Concrete
Although not normally considered to be a structural material, cellular concrete possesses characteristics which may result in its having structural applications in building and structural...
The Ultimate Load Design Method of R/C and P/C Shell
Based on the testing results of 20 full size shells and models, the ultimate load analysis method is proposed to design four different kinds of reinforced concrete shallow shell structures....
Rescuing the Everglades
After a century of trying to control Florida's Everglades, water management officials have decided that cooperating with nature is better. A new strategy known as the Rainfall...
Modeling Permissive Movements in TRANSYT-7F
Traffic Network Study Tool (TRANSYT-7F) is one of the most widely used traffic flow analysis and traffic signal timing optimization models in the United States and elsewhere. Through 'Release...
Conversion of the MIDAS Accident Analysis Model
The MIDAS (Michigan Dimensional Accident Surveillance) System has been developed to provide accident analysis capability. A microcomputer version of MIDAS is being developed to make the...
Teacher Friendly Transportation Programs
This contribution describes a set of computer programs that has mainly been developed to demonstrate operating and possibilities of mainframe programs during lectures. The program set...
Expert Systems for Traffic Signal Control
The level of service achieved by a pretimed signal timing control strategy implemented at an isolated intersection incurring saturated and over-saturated demand varies with actual traffic...
Materials and Member Behavior
Each of the papers in this book covers some aspect of material properties. New developments in cold formed steel are reviewed. The strength, stiffness, and ductility of steel connections...
Dynamics of Structures
This volume includes the papers presented at the 6th Structures Congress of ASCE which deal with the analysis, design, and behavior of civil engineering structures and facilities subjected...
Evaluation of Sediment Transport and Friction Factor Equations Using MOBED
Three sediment transport rate equations and the same number of friction factor equations for mobile boundary channel flows were evaluated using a mobile boundary flow model called MOBED....
FEM-Flow Analysis in Hydraulic Turbomachinery Runners
Finite element calculations of the flow through distributor and runner of hydraulic turbomachines are presented. The method is quasi-3D and inviscid, but the deviations from a potential...
Uncertainty Analysis of Field Turbine Performance Measurements
This paper presents comprehensive uncertainty analyses of two different flow measurement methods for field tests on turbines. The 'water to wire' efficiency was...
A Review of the Cross-Flow Turbine
The historical development of the cross-flow turbine is briefly presented together with a summary of the well-documented one-dimensional theory. Two-dimensional aspects of runner design...
Laser-2-Focus Flow Measurements in the Runner of a Bulb Turbine and Comparison with Calculation
Flow measurements are presented, which were carried out near and inside the 4-blade runner of an axial model bulb turbine of double adjustable type. These measurements were performed by...
New Concepts for Prelininary Hydropower Design
Hydropower generation on steep mountainous streams where storage is impractical can usually be made economical if: the flow duration curve shows sufficient energy available in the high...
Design and Manufacture of Turbine Runner Blades Using CAD/CAM-Technology
Interactive blade design, fluid flow analysis, stress analysis and NC-matching of both model and prototype blades are working from a common data base and are demonstrated in this paper....
Computerized Engineering for the Hydraulic Design of Hydro-Turbine Stay Vanes
To design a turbine stay vane as an integral part of the spiral case/stay vane/wicket gate waterpassage, both the vane geometry and the gate/vane position must be developed and analyzed....
Advance Prediction of Flow-Induced Variations
Frequency analysis of hydraulic vibrations has been applied using a transfer matrix and impedance method. The computer program is given for the self-excited and forced vibrations, together...
Open Flume Turbine Intake Geometry
An inexpensive physical hydraulic model was used to investigate the geometry of two different open flume turbine intakes. One intake utilized an inverted, fabricated pump bell type of...
Diffuser Performance for Draft Tube Applications
Available information on diffuser performance is summarized in relation to draft tube applications. This paper is particularly directed at the implications of basic research with these...
Return to search