Computer-Aided Structural Analysis
Finite Element Methods and other numerical techniques are often taught nowadays in the undergraduate Structural Analysis courses. Commercial, structural computer programs are becoming...

Accurate Response Analysis of Seismic Distributed Mass Systems
A dynamic analysis technique of distributed mass structures is presented with a combination of the dynamic load factor approach and the dynamic stiffness matrix method. The dynamic stiffness...

COMBAT.PC; a New Windows-Based Tool for Three-Dimensional Dynamic Analysis of Multi-storied Building Structures
By some accounts, analytical capability without the power of visualization is little productive; visualization is the tool that will turn computational power into practical results. COMBAT.PC...

Macro-Model for Inelastic Low-Rise R.C. Shear Walls
This paper presents an analytical technique for calculating static and seismic response of low-rise shear wall structures. The displacement response is resulting from bending, shear, and...

Discrete Optimal Design of 3D Frameworks
The paper describes a discrete optimization method for the least-weight design of three-dimensional (3D) steel building frameworks. The method involves the coordinated application of structural...

MINLP and MILP Strategies for Discrete Sizing Structural Optimization Problems
We address an important practical problem of optimum structural design in the presence of discrete sizing constraints. In addition, the topology of the structure may vary as well. The...

Structural Shape Optimization: An Implementable Algorithm
A computational algorithm for optimal shape design of linearly elastic structures is presented. For this problem continuum as well as discrete formulations have been developed and analyzed...

Damage-Tolerant Design of Deterministic and Nondeterministic Structural Systems
Many structures are exposed to very hazardous environments and they are likely to be damaged during their lifetime. Damage occurrence may cause a dramatic reduction in the safety of structural...

Simultaneous Design and Location of Actuators
A chance constrained model for determining optimal dynamic control parameters for structures subjected to probabilistic forcing amplitudes is presented. Optimal feedback control parameters...

Optimization of RC Frames with Reliability Concepts
Analysis and design optimization are considered simultaneously for reinforced concrete frames. Global displacements were considered as design variables. The nonlinear behavior of the elements...

Structural Optimization to Limit Natural Periods
It is necessary to limit the natural periods of some structures to control their response to dynamic loads. Floor systems with natural periods greater than approximately 0.15 seconds may...

Stiffness Optimization Methods for Lateral Systems of Buildings: A Theoretical Basis
The sizing of the members of the lateral resistance system for multi-story buildings is often controlled by stiffness requirements. In order to achieve economical buildings, it is important...

An Analysis Procedure for Cable Structures Using an Isoparametric Finite Element
The computer modeling and analysis of cable structures creates a major problem for the analyst in that the geometry of the cables is dependent on analysis results. The purpose of this...

A Regional Mapping Procedure for Finite Element Mesh Design
The paper summarizes our recent work in the development of practical algorithms for the automated mesh design in finite element stress analysis. A regional mixed mesh improvement procedure...

Column Buckling Mode Classification Using a Back Propagation Neural Network
A back propagation neural network (Rumelhart, Hinton and Williams, 1986) is used to analyze and classify the buckling mode shapes of structural columns. The input patterns consist of vectors...

Finite Element Analysis and Design of Plywood Shear Walls
An integrated procedure for the analysis and design of rectangular plywood shear walls is presented and illustrated. The analysis is done using an in-house finite element program with...

A Parallel Fron Large-Scale Stris
A methodology for large-scale structural analysis using a parallel frontal solution algorithm is developed and implemented on the Alliant FX/80 Multiple Instructions Multiple Data (MIMD)...

Parallel Preconditioned Conjugate Gradient Methods for Structural Analysis Problems with Multiple Loadings
This paper describes the use of conjugate gradient method for finite element problems with multiple loading cases. Specifically, we introduce a modified conjugate gradient method for the...

Building a Geographic Information System (GIS) for Siting New York City Sludge Management Facilities
Siting studies for waste facilities usually focus on a particular geographic region, or a defined study area, and are restricted to a specific technology. However, the siting of land-based...

A GIS for the Louisiana Coastal Zone
The U. S. Army Engineer District, New Orleans is responsible for collecting, interpreting, and publishing large amounts of data related to engineering geology, subsidence, and land loss...

 

 

 

 

Return to search