Lessons from Hurricane Andrew's Effects on Hydraulic Structures
Documentation and description of Andrew's effects on open channels and other hydraulic structures in South Dade County, Florida, are presented, based on observations made during field...
Linking Hydrologic and Hydraulic Routing Models in Low Relief Basins of South Florida
Combined use of hydrologic and hydraulic routing models to analyze the rainfall-runoff processes during a storm event is a common practice. In this approach, a hydrologic model is employed...
A Computer System to Operate Coastal Structures
The Central and Southern Florida Flood Control Project (C&SF) was designed and built by the U.S. Army Corps of Engineers and is operated and maintained by the South Florida Water...
Hydraulic Modeling of Alluvial Plains (Slopes) and Alluvial Fans Using DAMBRK
The design of hydraulic structures such as bridges on distributary flow areas and alluvial fans require methods that can adequately determine discharges at the structures. Flow conditions...
Alluvial Fan: Subset Definitions
The Flood Control District of Maricopa County, Arizona recently completed a study whose goal was to identify and describe four alluvial fans for instrumentation and long-term monitoring....
PMF Estimation for a Sparsely Gaged Watershed
This paper describes a procedure used to determine the design-basis and probable maximum flood (DBF and PMF) for Jiguey Dam located in the Dominican Republic. This dam is situated upstream...
A Probabilistic Approach to Estimate Design Parameters for Flood Control Projects
The purpose of this paper is to provide engineering consultants with an improved method to estimate design parameters for various return periods in rural areas. The proposed method combines...
Numerical Estimation of Macrodispersivities in Heterogeneous Self-similar Aquifers
Numerical simulations of contaminant transport in a stratified aquifer characterized by a self-similar distribution of hydraulic conductivity were performed. Macrodispersivities were calculated...
Non-Intrusive Crack Detection in Clay Landfill Cover Liners
Laboratory and field studies were conducted to demonstrate that the azimuthal variation in electrical resistivity can be used to indicate the presence of cracks in clay systems. Laboratory...
Additional Years of Record and Peak Discharge
The effect of additional years of stream gaging records is analyzed for stream gages in Nebraska. Frequency estimates are based on procedures outlined in Bulletin 17B, including skew coefficient...
Estimating Floodplain Limits for Complicated Hydrologic and Hydraulic Conditions
A new approach for estimating floodplain limits is shown. A hydraulic model with flood routing capabilities is coupled with a hydrologic model to compute river stages. Simulations are...
Technology Transfer to Developing Countries
The author describes three types of technology transfer programs that have been found to be effective in hydraulic engineering and other engineering disciplines and cites examples of how...
Probabilistic Calculation of Design Floods?SPEED
The probabilistic calculation of design floods was initiated in the 60s to overcome statistical calculation uncertainties. SPEED takes up and expands this original concept in the form...
Stormwater Infiltration Design Based on Rainfall Statistics and Soil Hydraulics
When comparing stormwater infiltration with other methods for stormwater drainage an appropriate design procedure is necessary. The method proposed for future Danish guidelines is based...
Design and Analysis of an Irrigation Pond Using Urban Stormwater Runoff
Stormwater held in detention ponds can be reused for irrigation. A simulation of a mass balance on pond storage volume using rainfall and evaporation data for selected areas is presented...
Streamflow Forecasting for the Bradley Lake Project
The National Weather Service (NWS) uses a suite of software called NWS River Forecast System (NWSRFS) for operational river stage and streamflow forecasting. NWSRFS is a modular system...
A Semi Passive Nutrient Injection System for In Situ Bioremediation
A permeable cutoff wall is installed across the path of a contaminant plume. The water in the wall can be amended with the desired nutrient solution using pumping and injecting wells within...
A Review of Surface-Groundwater Interaction Models
Surface-water and groundwater systems are in continuous dynamic interaction. Processes such as infiltration from surface waters and precipitation, the discharge of groundwater to surface...
Next Generation HEC Catchment Modeling
The Hydrologic Engineering Center (HEC) is developing next generation computer models to replace those in current use. The next generation Hydrologic Modeling System (HEC-HMS) is an object...
Model Structure Validation in Groundwater Modeling
Structure equivalence models (SEM), a new concept in groundwater modeling, have been developed to assist in groundwater planning and management. Using SEM, the engineer is able to satisfy...
Return to search