McNary Powerhouse Generating Unit 14 Stator Core and Winding Replacement
The powerhouse contains 14 main generating Kaplan-blade units, each rated at 73,684 kVA at 0. 95 power factor. In early 1985 the decision to rewind and uprate Unit 14 was being finalized....
Design Improvements on a Small Hydro Project
The Whiskeytown Hydroelectric Project, built for the City of Redding, California, provides an excellent example of the type of improvements in general arrangement which can be achieved...
Design of Seepage Control Systems for RCC Dams
As the reservoirs of the first generation of roller compacted concrete (RCC) dams have been filled, several have exhibited significant amounts of seepage, a fact that has been of concern...
Compaction Parameters of Roller Compacted Concrete
Density in roller compacted concrete is usually achieved through vibratory compaction. Factors of major influence in attaining densification of a structure with a vibrating roller are...
Evaluation of Cores From Two RCC Gravity Dams
Galesville Dam, Oregon, completed in August 1985, and Upper Stillwater Dam, Utah, completed in August 1987, are two RCC (roller compacted concrete) gravity dams featuring different approaches...
Monksville Dam: Design Evolution and Construction
This paper documents the application of experience gained at other RCC projects to the Monskville Dam. The evolution of the design and its translation to construction are presented together...
RCC in Dams in Australia
The design, construction and performance of the first three dams constructed in Australia, using RCC are described. Aspects covered in the paper include designing for zero cohesion between...
Design of Roller Compacted Concrete Pavements
This paper reviews some of the differences between roller compacted concrete and conventionally constructed concrete pavements. These differences require additional consideration during...
Evaluating Sinkhole Hazards in Mantled Karst Terrane
Sinkholes are the most serious geologic hazard in karst terrane because they can damage structures, drain ponds and lakes, and allow direct infiltration of groundwater contamination. The...
Flow Behavior of Kinked Strip Drains
Due to the often expressed concern over the axial deformation of strip drains and the resulting impact on flow rate, this study has been undertaken. A laboratory experiment has been constructed,...
Clogging Study of Geotextile with Weathered Mudstone
This paper focuses on the combined use of fly ash and geotextiles as a solution for the typical engineering problem of weathered mudstone slopes encountered in Taiwan. In situ collapsed...
Survivability and Durability of a Nonwoven Geotextile
This paper presents the results of a field investigation and laboratory testing program to evaluate the properties of two different polypropylene, thermally-bonded nonwoven geotextiles...
Pull-Out Response of Geotextiles and Geogrids (Synthesis of Available Experimental Data)
During the past 15 years, there has been a considerable growth in the use of various materials to reinforce soils. The rapid development of geosynthetics and their increasing use in soil...
Low Permeability Liners Incorporating Fly Ash
This paper summarizes the results of a research study undertaken at West Virginia University to evaluate the feasibility of utilizing stabilized fly ash as a low permeability liner material....
Highway Damage Due to Subsidence
In this study subsidence profiles over three longwall panels, which were mined beneath state highways in Southeastern Ohio, were obtained. Immediate and short term subsidences were recorded....
Markov Chains & Soil Constitutive Modeling
The focus of this research effort is the construction of a mathematical framework to assist in understanding the role of uncertainties in the constitutive/dynamic behavior of soils. The...
Probabilistic Fatigue Crack Growth Analysis with Reliability Updating
A randomized fatigue crack growth model based on the Paris and Erdogan crack growth equation is used to estimate the reliability of fatigue sensitive details in steel bridges. This model...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
Probabilistic Slope Stability?Case Study
The stability of a slope depends upon highly variable conditions of varying degrees of importance. Probability theory is used herein to assess the relative importance of the soil parameters...
Probabilistic Model for Stability of Slopes
Presented herein is a probabilistic model based on derived distributions to predict shear strength of soils and the safety factor of slopes considering uncertain properties of soil, namely:...
Return to search