Tension Leg Platform
a State of the Art Review
Prepared by the Task Group on Compliant Offshore Platforms of ASCE. This report considers the analysis and design of tension leg platforms (TLPs),...
Collapsible Soils in the Antelope Valley�California
Soils subject to hydroconsolidation, commonly referred to as collapsible soils, have a potential to undergo significant volume reductions upon wetting, with or without additional loading...
Fracturing of Rock Using Expansive Soundless Chemical Demolition Agents
The theoretical principles of the action of expansive soundless chemical demolition agents are presented. The procedure for using these demolition agents are briefly outlined. Differences...
Bearing Pressure?SPT Correlations for Expanded Base Piles in Sand
Design of enlarged base piles is usually carried out using correlations between SPT N values and point resistance. The results of full scale load tests are used to show that base resistance...
Performance of a Large Ribbed Mat on Cohesive Soil
The performance of a 678-ft by 304-ft (207-m by 93-m) ribbed concrete mat was studied to provide improved soil input parameters for design. The mat was constructed on a low plasticity...
Bearing Capacity of Shallow Foundation on Granular Column in Weak Clay
Laboratory model tests results for the ultimate bearing capacity of shallow rectangular foundations supported by granular columns made in weak clay have been presented. In all cases, the...
Chemically Induced Foundation Heave
The Kerr-McGee Electrolysis Plant in Henderson, Nevada has had recorded upward movements of portions of the building in excess of 18 inches. Contours of the measured heave indicate that...
Ponds and Lagoons of Gulf Islands National Seashore
A physical and natural resource survey was conducted of the ponds and lagoons on Horn and Petit Bois Islands, Gulf Islands National Seashore, Mississippi. Petit Bois Island contains 17...
Dredge Disposal Monitoring by Fourier Shape Analysis
Fourier grain-shape analysis characterizes a population of sediments in terms of the shapes of the grains. The technique of grain-shape analysis has been successfully applied to the area...
Geocosta Operations?A Program of Oceanographic Expeditions for the Brazilian Inner Shelf
In July 1979, a new expedition was conducted with the R.V. Almirate Camara, in the same area as GEOMAR X, with the following purposes: surveying profiles with side scan sonar and conducting...
Structural Design, Analysis and Testing
This volume contains the papers presented in 21 sessions of the 1989 Structures Congress held in San Francisco. The papers cover a wide range of topics including types of construction...
Structural Materials
This volume of Structural Materials contains papers from 12 sessions of the 7th Structures Congress held in San Francisco on May 1-5, 1989. The sessions cover a very broad range of topics...
Design of Plastic Piece Parts
This paper describes a computer assisted design process originally developed at the University of Wyoming and now implemented in commercial software. In order to address the need for broadly...
Stereolithography
Stereolithography is a three-dimensional printing process which produces accurate copies of CAD solid or surface models directly from CAD data. The process uses a moving laser beam, directed...
Gamma Exposure from Rn Progeny in GAC Units
An investigation into the gamma exposure rate generated by granular activated carbon (GAC) water treatment units focused on ten sites that covered a range of source radon (Rn) in water...
Using Borosilicate Glass as a HLW Storage Medium
There is growing concern over the quality of present high level waste management techniques. Instances of nuclear accidents and contamination at nuclear waste sites in the United States...
Low-Level Waste Disposal Design: An Overview
Low-Level radioactive waste disposal is regulated by several agencies. Mixed waste, which is both radioactive and chemically hazardous is regulated by two agencies with potentially different...
The Utilization of a Deflocculant to Decrease the Permeability of a Clay Liner
A hazardous waste landfill was completed in Oklahoma during 1988. The clay liner was constructed to fulfill the RCRA requirements for permeability of equal to or less than 1E-07 centimeters...
Drainage of Landfill Covers and Bottom Liners
This paper presents two new tools for preliminary evaluation of drainage-system designs. The first is a set of equations that define the saturated-depth profile for steady drainage over...
Instability of Bed-Surface Composition Due to Sorting Process in a Stream Composed of Sand and Gravel
Wavy patterns of sorting are often observed in a stream composed of sand and gravel, and they are regarded as instability of bed-surface composition due to selective bed-load transport...
Return to search