Local Buckling and Cyclic Behavior of Tubular Members
The effect of the local buckling is included in the cyclic analysis of tubular members. The cyclic moment-curvature curves are obtained numerically. Three types of closed form expressions...
Cyclic Behavior of Concrete-Filled Tubes
This paper presents the results of tests on hollow and concrete-filled rectangular tubes subjected to cyclic bending and buckling. It is shown that concrete infill greatly improves the...
Uncertainties in Wind Loads Caused by Adjacent Buildings
Mean and fluctuating values of all three moment components caused by wind acting on small-scale models of tall prismatic buildings have been measured. Measurements were made in a boundary-layer...
Assessment & Control of Wind Created Risk During Construction
Structures under construction have been damaged by winds. The damaging winds, typically, are much lower than the design wind loads for completed structures. Little guidance is available...
Measuring the Spatial Characteristics of Unsteady Pressures
This paper has reviewed current methods of determining spatially-averaged time-varying wind loads on wind tunnel building models. Some of the possibilities opened by simultaneous multi-channel...
Research Needs to Resist Terrorist Attacks
The task of protecting facilities against terrorist attacks is very much a new problem for the U. S. civilian sector. Guidance as to what steps need to be taken by a municipality or a...
Improved Design Procedure for Shallow-Buried Structures to Resist Airblast Loading
Both conventional and nuclear weapons generate airblast loads of sufficient magnitude that structure survival at acceptable cost favors below grade construction. The design of shallow-buried...
Suspended Polycarbonate Shield to Defeat Terrorist Threats
The Navy Civil Engineering Laboratory is conducting research on a window concept that offers great potential for overcoming the disadvantages of blast resistant windows. The concept is...
Limiting Performance and Design by Reanalysis of Structures for Blast Resistance
Limiting performance is the absolute optimal response of a structure under a specified transient load. Reanalysis methods are computational techniques for analyzing locally modified large-scale...
Flexibly Connected Thin-Walled Steel Frame Response
The static response of flexibly connected plane frames composed of thin-walled steel members is presented. Analysis capabilities include post-local-buckling strength and elastic semi-rigid...
Centrally Loaded Columns
The paper has given a detailed description of the chapter on centrally loaded columns that will appear in the 4th Edition of the Structural Stability Research Council 'Guide...
Beam-Columns
The Fourth Edition of the SSRC Guide presents a state-of-the-art information on beam-columns for use by specification writers, researchers, and designers. The present paper is an extremely...
Frame Stability
The Chapter on Frame Stability of the Fourth Edition of the SSRC Guide provides guidance on use of several stability design procedures. These include Critical Load Concept, Second-Order...
Effect of Connector Spacing on Double Angle Compressive Strength
The 1986 AISC 'Load and Resistance Factor Design (LRFD) Specification for Structural Steel Buildings' includes new rules affecting the design of built-up members...
Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
Polymer Concrete for Structural Applications
Polymer concrete (PC) has been used extensively in the United States primarily as a repair material for portland cement concrete. The excellent flexural and compressive strength durability...
High Strength Concrete - A New Material
In this paper, the material properties and structural member behavior of normal and high-strength concretes are summarized. The current ACI code recommendations are based on results of...
Structural Considerations of Cellular Concrete
Although not normally considered to be a structural material, cellular concrete possesses characteristics which may result in its having structural applications in building and structural...
Large Reinforced Concrete Active Reclaim Silos
The design and construction of large reinforced concrete shell silos used to provide economical short-term protected storage for coal and lignite in the active reclaim systems of power...
Return to search