Health Benefits From the Use of Appropriate Technologies in Water Supply and Sanitation
Research on selected diseases in developing countries has found significant health impacts from water supply and sanitation interventions. Sanitation, personal and domestic hygiene, and...
Modeling of Wetland Hydrodynamics and Transport in Coastal Louisiana
Modeling of hydraulics and transport of large wetland systems poses critical decisions between resolution of the complex geometry of a wetland and the testing required to meet study goals....
Bridge Scour Research Needs
This paper presents a summary of the Federal Highway Administration (FHWA) priority research emphasis on bridge scour, sedimentation, and stream stability problems. The most persistent...
Management and Institutional Considerations in Selecting Appropriate Technologies in Water Supply and Sanitation
Rural water supply and sanitation systems in developing countries have had an unacceptably high rate of failure or reduced use. Development planners have not sufficiently considered the...
Education, Research and Training for Appropriate Technology
Much has been written about appropriate technology (AT) and how to accomplish it. This paper adds to that literature with specific ideas for education, training and research programs and...
Appropriate Technology in Hydraulic Engineering
Appropriate, and successful, technology transfer is contingent upon the simple dictum: technology transfer is context dependent and context specific. Optimum success in the transfer of...
Issues and Challenges Facing the Effective Delivery of Scientific Visualization
The availability of economical hardware and software products for scientific visualization has stimulated implementation of scientific visualization within high performance computing environments....
Introduction, and Analysis of Survey?Preliminary Report of Task Committee on Recommendations for Standards in Hydraulics
To help formulate its recommendations for future standardization of tasks in hydraulic engineering, the Task Committee conducted a survey of practicing engineers. This survey indicated...
Existing U.S. Standards in Hydraulic Engineering
The Task Committee on Recommendations for Standards in Hydraulics confined itself to topics that are used in hydraulic computations or design. Thus numerous standards related to size,...
Foreign Hydraulic Standards and Guidelines
Standardization in Europe is propelled by the incentive to achieve harmonization of design, testing, inspection and certification methods for an internal market among eighteen European...
Preliminary Recommendations from the Task Committee on Standards in Hydraulics
The Task Committee on Standards in Hydraulics has been given the responsibility of recommending whether or not the American Society of Civil Engineers (ASCE) should formulate standards...
Environmental and Hydraulic Considerations in the Design of a Circulating Water Cooling System
Environmental considerations play an important part in the design of a condenser cooling system. A once-through system may require assessment of a combination of events to determine the...
Set-Down in a Tidal Embayment
A mean water level in tidal bays and estuaries that is higher than the ocean mean water level (set-up) is a fairly common occurrence. Set-down of the mean water level can be shown to be...
Sediment Modeling of Dam Removal Alternatives, Elwha River, Washington
The new version of the U.S. Army Corps of Engineers (ACOE) 1-Dimensional sediment transport model, HEC-6 'Scour and Deposition in Rivers and Reservoirs', was...
Data Acquisition Systems for IBM Compatible System
Portable data acquisition systems composed of IBM compatible PC/XT/AT computers and analog to digital conversion cards can be configured with relative ease. These systems have the flexibility...
Computerized Data Acquisition for an Undergraduate Hydraulics Laboratory
Basic hydraulics principles and the operation of certain hydraulic systems can be effectively demonstrated with the aid of relatively inexpensive data acquisition and analyses systems....
Use of Electronic Microprocessor-Based Instrumentation by the U.S. Geological Survey for Hydrologic Data Collection
The U.S. Geological Survey is acquiring a new generation of field computers and communications software to support hydrologic data-collection at field locations. The new computer hardware...
A Knowledge-Based System for the Environmental Design of Waterways (ENDOW)
Knowledge-based software systems accept problem descriptions from users and apply logic in order to generate a solution or solution set. These systems function over very narrow problem...
LISP or CLIPS: Selecting an Expert System Tool in Hydraulic Engineering
The transfer of Artificial Intelligence(AI) technology from the research laboratories to the scientific and engineering environments has been made possible by phenomenal advances in computer...
Fluid Mud Problems in Lakes, Reservoirs and Detention Ponds
An experimental study of wind induced surfacing of fluid mud bottoms in shallow water has been conducted. The experiments involved a channel placed within a wind tunnel, where a two-layered,...
Return to search