Bearing Capacity of Footings on Clay CPT Method
A method is proposed to predict the ultimate bearing pressure for footings on clay using data from cone penetration tests. This method relates the ratio of ultimate soil bearing for a...
Skin Friction Evaluated From Friction Meter Test
This paper first describes the features of a specially developed friction meter and its operation method, and then reports in-situ test results conducted on various types of soils at two...
Uplist Capacity of Pile Foundations Using CPT Data
Southern California Edison Company has performed field uplift load tests on concrete driven piles, cast-in-place straight shaft piles and cast-in-place belled piers along transmission...
Effctive Stress Interpretation of In-situ Tests
Significant differences in terms of load-settlement curves obtained from Plate Load Tests (PLT) and q//c profiles obtained from Static Cone Penetration Tests (SCPT) at two sites with different...
Fast, Economical, Cone Testing of River Sediments
The objective of the study reported was to obtain quantitative geotechnical information over many square miles of Hudson River bottom. A hand held cone penetrometer was selected for use....
N-Values Used to Predict Settlements of Piles in Egypt
A method is proposed for using the standard penetration N-values to predict the load-settlement curves for different piles used in Egyptian soils. The method is based on H. G. Poulos-E....
Cable Stays Catch On
The three completed cable stayed bridges in the U.S.�Pasco-Kennewick in Washington, Luling-Destrehan in Louisiana and East Huntington in West Virginia�will soon be joined by another half...
Controlling Sulfide Corrosion in Large Diameter Gravity Sewers (
The County Sanitation Districts of Los Angeles County undertook a major evaluation of sewer system ranging in size from 1. 22 to 3. 65 meters in diameter that transports peak wastewater...
Effect of Particle Size on Sludge Dewaterability
Using a modified Buchner funnel apparatus to measure specific resistance and a sequential centrifugation/filtration procedure to fractionate a sludge, it was possible to more precisely...
Coupling Free Vortex Energy Dissipation with Sediment Control
The paper reports on studies showing that sediment control down to the abrasive limit of 30 micron sand and energy dissipation can be achieved simultaneously with a Teacup free vortex...
Reservoir Sedimentation and Desilting in Taiwan
The island of Taiwan is infested with numerous flashy streams with steep slopes and huge sediment loads, thus, the major reservoirs have experienced heavy sediment deposit. The encroachment...
Management Practices for Erosion and Sediment Control in Irrigated Agriculture
Basin irrigating rice can reduce suspended sediment loads in water because the basins serve as sediment retention basins. Furrow erosion causes significant suspended sediment loads in...
The Effect of Storms on Pollution Loading Estimates
A rather extensive field and modeling program is underway in the Sandusky Bay/Nearshore region of Lake Erie and the objective of this paper is to summarize the preliminary results of a...
Annual Sediment Loads of Illinois Streams
Incorporation of sedimentation surveys for 24 Illinois lakes was needed to provide somewhat long-term average sediment yields of Illinois streams. For each suspended sediment station a...
Flow and Sediment Transport in Curved Channels with Nonuniform Bed Material
Described is a scheme for controlling the exchange of grain sizes between bed and bed load in a curved alluvial channel. The scheme is an integral part of a model for simulating spatial...
Reviewing for Potential Failure
The key to preventing structural failures is to examines them and develop systematic techniques for avoidance. One, called contingency analysis, starts with a what if process to decide...
Available Compaction Equipment
When discussing available compaction equipment we must keep in mind the purpose of compaction. Compaction is the art of artificially increasing the density or increasing the unit weight...
Rapid Assessment of Seismic Vulnerability
The choice of a seismic damage assessment method depends fundamentally on how the assessment will be used, but always involves definition of the expected ground motion and the structure...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Techniques for Estimating Earthquake Probable Loss for Buildings and Contents
The probable maximum loss (PML) is useful for quantifing the seismic risk exposure of a facility and for rational decision making regarding earthquake insurance and seismic strengthening...
Return to search