Reliability-oriented Design of Fatigue Experiments
It is well known in the reliability analysis for structural components subjected to cyclic random load that apart from the usually model parameters uncertainties are most important and...
Reliability Revision for Structures in Service
Models of structural reliability are called upon to provide not only initial estimates of safety, but also revised estimates reflecting new information on the structure as it becomes available....
Aluminum Orthotropic Bridge Deck Verification
This paper reports tests conducted to evaluate an aluminum orthotropic deck. Approximately 60 welded T-joints with 6061-T6 stems and 5456-H321 plate were subjected to flexural fatigue...
Fatigue Design Criteria for Welded Steel Details
A review of fatigue data and reassessment of the 1983 fatigue specification resistance functions has been conducted. Since the AASHTO specification fatigue resistance provisions were introduced...
Base Isolation for Reinforced Concrete Structures
A recent experimental program has been carried out at the Earthquake Simulator Laboratory of the Earthquake Engineering Research Center in which a 1/5th scale reinforced concrete structural...
Structural Considerations of Cellular Concrete
Although not normally considered to be a structural material, cellular concrete possesses characteristics which may result in its having structural applications in building and structural...
Large Reinforced Concrete Active Reclaim Silos
The design and construction of large reinforced concrete shell silos used to provide economical short-term protected storage for coal and lignite in the active reclaim systems of power...
The Ultimate Load Design Method of R/C and P/C Shell
Based on the testing results of 20 full size shells and models, the ultimate load analysis method is proposed to design four different kinds of reinforced concrete shallow shell structures....
Substitute Wind Concept for Elastic Stability of Cooling Tower Shells
The influence of the nonaxisymmetric wind distribution on the stability behavior of cooling tower shells is examined. It is demonstrated, considering about 50 cooling tower shells, that...
Applied P-Delta Methods in the Design Office
At first glance some axioms of a P-Delta analysis appear to be paradoxical. First, the P-Delta effects are a direct function of the depth of the structure parallel to the wind direction....
Frame Stability - A Canadian Designer's Approach
The deficiencies and fallacies of the simplistic effective column length approach to frame stability are demonstrated through its application to a 57-story rigidly framed building structure....
Role of Microcompiuters in Highway Weigh-in-Motion Systems
Microcomputer technology makes it possible to digitize the signals, calculate the desired factors, and record and display the information in real time at the weigh-in-motion (WIM) site....
Materials and Member Behavior
Each of the papers in this book covers some aspect of material properties. New developments in cold formed steel are reviewed. The strength, stiffness, and ductility of steel connections...
Dynamics of Structures
This volume includes the papers presented at the 6th Structures Congress of ASCE which deal with the analysis, design, and behavior of civil engineering structures and facilities subjected...
Save the Walls
A rehabilitation job in name only, the 75 year old Army and Navy Club, a landmark located in Washington D.C.'s Golden Triangle, retained only two of its 80 ft high exterior...
Wind Loading and Wind-Induced Structural Response
A State-of-the-Art Report
This state-of-the-art report presents fundamental and practical aspects of modern wind engineering practice as it relates to structural design. The first chapter includes information on...
Wind Tunnel Model Studies of Buildings and Structures
This manual provides guidelines on wind tunnel model testing of buildings and structures. Included are procedures required to provide representative information on wind effects experienced...
Advances in Controls to Govern Mini and Micro Hydropower Systems
Conventional controls available for small hydropower systems are surveyed. Electronic load controls for micro hydropower systems are described. Recent developments in the literature are...
Installation and Startup of the Idaho Falls Bulb Units
The Idaho Falls Low-Head Hydroelectric Demonstration Project consists of the redevelopment of three existing power plants using identical bulb turbines and generators. This paper summarizes...
Francis Turbine Surge Prediction and Prevention
Every Francis turbine has some range(s) of load where the flow in the draft tube is subject to fluctuations. Various types of surge during 'steady-state' operation...
Return to search