Modeling Fatigue Crack Growth Resistance, dN/da
In the fracture mechanics approach to fatigue, da/dN is correlated with the cyclic range of the stress intensity factor, ?K; the resulting relation, da/dN=f (?K), is commonly called the...
Load Combinations for Codified Design
Loading requirements used in current standards for structural design are not consistent in their conceptual basis, appearance or use. Unified limit states design procedures for structures...
Load-Sharing and Reliability of Wood Systems
A methodology for the study of reliability of light-frame wood structural systems is presented. Reliability levels associated with the bending strength limit state of such systems are...
Development of Bridge Design Code
Load and resistance parameters for bridges involve uncertainties due to natural randomness, imperfect models or human errors. Because of these uncertainties, absolute reliability is not...
Probabilistic Load Combinations in Nuclear Structures
A variety of loads affect a nuclear power facility during its lifetime. The magnitudes or intensities of these loads are uncertain, and for some of them, their time of occurrence is also...
A Reassessment of Codified Limit States Design
This paper examines the nature of design codes and their relation to engineering practice. It suggests that codes impose unjustifiable and, in the long term, destructive constraints on...
Pore Pressure Development: Probability Analysis
The development and subsequent dissipation of excess pore pressure, p in a soil deposit subject to an external load is examined using probability concepts that account for uncertainties...
Dependence of Fatigue Damage on Loading Amplitude Variability
Welded steel specimens have been tested under variable amplitude loadings to determine the extent to which fatigue life is affected by the rate of amplitude variability of the loading...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
Stochastic Fem Analysis of Nonlinear Dynamic Problems
This paper deals with the stochastic finite element analysis of nonlinear structural dynamic problems, using Monte Carlo simulation techniques. The stochasticity of those problems arises...
Reliability of Geometrically Nonlinear Structures
A procedure for first- and second-order, finite-element reliability analysis of geometrically nonlinear structures under static loads is presented. Structures are either linear or nonlinear...
Multicriterion Reliability-Based Optimization of Structural Systems
The optimization of nondeterministic structural systems under random loads is currently performed by single-criterion reliability-based optimization methods. However, in structural design...
Analysis of Bridge Truck Loads
The development of the reliability-based load and resistance factor design (LRFD) methodology requires uncertainties in loads and resistance be quantified. In the load capacity evaluation...
Research Needs for Rational LRFD Criteria
There are at least a dozen factors causing or influencing impact. Current design specifications consider only a few of these. Location of truck wheel loads within the traffic lanes on...
Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....
Bridge Repairs?Unexpected Effects on Reliability
There is a significant probability that a bridge will require repairs at some time during its service life. Repairs correcting one deficiency can cause other, unanticipated problems. Awareness...
System Reliability Under Time Varying Load
The reliability of ductile and brittle structural systems under time varying loads is investigated. The formulation in the context of outcrossing of a vector process is examined. A new...
Reduction of Imposed Loads for Beam and Column Design
Imposed loads on beams and columns are generally reduced to effect in economy in design. A study to evaluate the reduction criteria by evaluating the Equivalent Uniformly Distributed Loads...
Design Wind Loads for Broadcasting Antennas from Short Time Records
Very useful would be procedures for the determination of the design wind load on the basis of short time records, of duration comparable with the preliminary and/or design phases, so that...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Return to search