On the Coexistence of Bedload and Suspended Transport for a Uniform Grainsize Material
A sensitivity analysis and an experimental verification have been made to assess the validity of the equations that describe the sediment transport in non-equilibrium conditions, when...
Sediment Transport Rate for Non-uniform Sand
Based on the equations of bedload transport by authors, the functional relation of total sediment transport capacity of flow has been found. The modifying coefficient due to non-uniformity...
Laboratory Analysis of Hyperconcentrations
The physical and kinematic behavior of hyperconcentrations has been reviewed and a summary of recent and past developments in hyperconcentrated flow research is presented. This paper focuses...
Total Sediment Load Calculations for Goodwin Creek
Total sediment transport load of Goodwin Creek was calculated for the period from 10/1/84 to 9/30/88 using transport relations derived from sample data for the fines (< 0.06 mm),...
Estimation of Unsampled Sediment Discharge
A procedure is developed to estimate the total bed material load without using the size distribution of suspended load. Because of the uncertainties involved in the calculation of the...
A Watershed Model of Sediment Transport?Load-I
A watershed sediment transport model has been formulated and optimized upon storm hydrographs and the associated sediment load data for several watersheds that have been urbanized and...
Bed Topography and Sorting in Alluvial Channel Bends
A quasi-three-dimensional model has been developed for the purpose of calculating the velocity distribution, the bed topography and sediment sorting along channel bends. The depth-averaged...
Groins and Vanes Developed Basing Upon a New Concept of Bank Protection
At curved bends, scour at the outer bank always accompanies deposition at the inner bank. A highly efficient river course for flood flow is considered to have a small lateral gradient...
A Stochastic Approach to Sediment Transport in Alluvial Rivers
A dimensionless sediment transport function relation for alluvial rivers has been developed using stochastic approach. The dimensionless function may be applied to estimate suspended load,...
Probabilities of Hydrologic Extremes and Risk Analysis
Extreme floods of very low probabilities, e.g., 10-6 and 10-7, are estimated using data on annual flood peaks...
Joint Probability Calculation of Storm Depths
A methodology is presented to estimate exceedance probabilities of rainfall depths over large areas using joint probability. The joint probability estimate combines the frequency distribution...
Effects of Climate Change on Watershed Runoff
This paper examines forecasts of changes in watershed runoff in the Delaware River basin that result from a range of predicted effects of increased atmospheric carbon dioxide (CO2)...
Effects of Runoff Changes and Sea Level Rise on Salinity in the Delaware River Estuary
The objective of this study is to investigate changes in the spatial distribution of salt in the Delaware Estuary resulting from climate induced changes in freshwater inflows and in the...
Technical Considerations in Numerical Modeling of Pressure Reducing Valves in Water Distribution Systems
In large water distribution networks, pressure reducing valves (PRVs) are common water appurtenances. However, there are difficulties in representing them when using the Hazen-Williams...
Seven Oaks Dam Outlet Works Design
The U.S. Army Corps of Engineers has completed the preliminary design of the outlet works for the proposed Seven Oaks Dam. The dam is the upstream-most feature of the Corps'...
Model Study of New Madrid Pumping Station
The proposed pumping station on the New Madrid Floodway consisted of a draft tube type sump design (referred to as a formed suction inlet) to eliminate swirl and provide a more uniform...
Overfall Stress and Pressure Distributions
The magnitude and distribution of hydraulic shear stress and pressure on the boundary of a straight drop overfall are presented for multiple overfall heights and flow rates. Hydraulic...
Fixed-Wheel Gates Uses and Limitations
The fixed-wheel type of gate, which derives its name from sets of wheels mounted on axles fixed to the gate, rolls upon and transmits the hydraulic load of the gate to guide tracks bearing...
Siting the New Boston Outfall: Near-Field Considerations
This paper describes a procedure applied in near-field considerations for siting the new outfall to serve the Massachusetts Water Resources Authority's (MWRA) proposed regional...
Determining Hydro Project Dependable Capacity
Traditional techniques for estimating a hydro project's dependable capacity are of limited value when evaluating a hydro project in a thermal-based power system. For such...
Return to search