The Independent Cost Estimating Process
The United States Department of Energy (DOE) requires that an Independent Cost Estimate (ICE) be prepared for all Major Systems Acquisitions (MSAs); that is, projects or programs expected...
Robust-Multibarrier Waste Package Thermal Evaluation
One of the key issues to be addressed in developing a successful permanent radioactive waste storage concept is the thermal effect due to the spent nuclear fuel (SNF). The thermal output...
Characterization of Porosity in Support of Mechanical Property Analysis
Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of...
Flow Visualization and Relative Permeability Measurements in Rough-Walled Fractures
Two-phase (gas-liquid) flow experiments were done in a natural rock fracture and transparent replicas of natural fractures. Liquid was injected at constant volume flow rate, and gas was...
Tolerance Requirements for Remote Handling at the Hanford Vitrification Project
A new and innovative approach to installation of the many remote nozzles and electrical connectors that must be installed to demanding tolerances has been developed by the architect/engineer...
Partnering in Water Resources Planning in Florida
This paper discusses successful partnering efforts by the Corps of Engineers in water resources development in Florida. The partnering involves the Corps, local project sponsors and other...
Wetland Engineering, Design, and Construction: State-of-the-Science and Research Needs
Local, state, and federal agencies, special interest groups, and individual landowners are undertaking wetland construction projects at a feverish pace to mitigate past and anticipated...
Use of Flood Control Features for Environmental Mitigation
The US Army Engineer District, Vicksburg (CELMK), plans to construct up to 167 water control structures, 52 confined disposal facilities, and 47 barrow pits as part of a major flood control...
Innovative Wetlands in Urban Settings Using Dredged Material
As a result of its work in the waterways of the nation, the U. S. Army Corps of Engineers (USACE) has restored or constructed wetlands using dredged material in a number of urban/suburban...
Innovative Wetland Re-creation in Urban Setting
The project site is a 106 hectare, mixed-used, commercial development east of Tampa, Florida and at the westerly limit of the town of Brandon, Florida. Delaney Creek traverses the site...
Hydro Models and Salmon Recovery in the Northwest
Hydro regulation models provide extensive support for analyzing the efficacy of salmon recovery plans in the Northwest. Power planners developed these computer programs to help plan and...
Remarks on Computer-Use History in Water Resources
Over the past 50 years, use of electronic computers has radically changed water resources engineering practice. It has enhanced capabilities, reduced costs and improved reliability. It...
An Historical Perspective on Water Resources Education
A professional education in water resources combines courses that apply sound science to meet popular needs with general knowledge on how society uses and views water. The graduate has...
Future Directions in Water Resources Education
Water resources education at the undergraduate level must change to properly prepare professionals for the 21st Century. While few changes are needed in technical content, graduates must...
Evolving Institutions for Managing the ACF Basin
The ACF basin is a case of interstate conflict in resource management. This study looks at the planning underway with regard to mechanisms for managing the basin....
Real-Time Water-Control System for the Trinity River, Texas
To provide information for improved flood prevention and control in the Trinity river basin in Texas, we developed a real-time water-control system that (1) retrieves rainfall and streamflow...
ASCE Annual Combined Index 1992
The
Marketing Strategies for Engineers
Engineers face the constant challenge of informing the public and their potential users of their capabilities and the benefits that may be achieved from their services.
The Application of AI in Highway CAD System
In a conventional CAD System, the process for solving a certain particular engineering problem is fixed stationary in the program. As a result, the program is often modified to fit different...
The 3D Approach to Design
Designing directly in three dimensions, including integrated analysis and information flow, is a powerful way to enhance civil engineering capabilities. Yet, relatively few have taken...
Return to search