Design of the Oasis Advisory System
Once the decision was made to develop an advisory system for the operation of water control structures within the South Florida Water Management District, a schedule of activities leading...
Assessing WQ Impacts Using a Hydraulic Model
Engineering projects may cause water quality impacts in estuarine systems. It is important to assess those impacts during the planning phase of the project so that mitigation measures...
An Intelligent Design Support System for Computer-Aided Site Development
This research proposes an intelligent design support system (DSS) integrated with a CAD environment for building site planning and development. The DSS is used for providing a good initial...
Stochastic Model for the Management of a Stream-Aquifer System
The management of a system of groundwater and surface water requires that the hydraulic connection of the two sources be investigated. The inherent uncertainties that exist in the data,...
Water Distribution Systems Analysis Package
A computer software package for water distribution systems analysis has been developed for the city of Fort Worth, Texas, to overcome the problems of time consumption and human error,...
Water Distribution Network Calibration Considering Multiple Loading Conditions
Through time a water distribution network's carrying capacity is reduced as material collects on pipe walls. The impact varies with each pipe in the system and occurs at an...
Methodology for the Optimal Reliability Based Design and Analysis of Pumping Systems for Water Distribution Networks
A methodology has been developed for the optimal (minimum cost) reliability based design of pumping systems. Two computer simulators, a reliability simulator and a hydraulic simulator,...
Hydrologic and Hydraulic Calibration?A Case Study (a)
The Addison Creek watershed is in Cook and DuPage Counties just west of Chicago, Illinois. Because the watershed has a history of major flooding, eight major stormwater and flood control...
CADD Applications in Water Resources Design
CADD can provide substantial benefits, in terms of speed and ease of revisions, in the design of civil engineering projects, including water resources facilities. However, current design...
Continuous Drainage System Modeling of Jones Run
A generalized package of hydrologic and hydraulic models has been developed for the quantitative analysis of watersheds and drainage networks. The package is called ODWAP (the Old Dominion...
Virginia Case Studies of Risk Based Drainage Design
The goal of this paper is to apply a practical engineering risk-based method of design of pavement and surface drainage systems to three Virginia case studies. The target systems include...
Comparison of Storm Water Management for Phoenix and Washington, D.C. Urban Areas
The design criteria, the methods of analyses, and the estimated costs of construction are compared for two storm water management systems in the Phoenix, Arizona and the Washington, D.C....
Vacuum Sewers: Construction and Operating Experience
As an alternative to conventional collection, the vacuum system has many advantages. Smaller diameter pipes, shallower trenches and the ability to make vertical and horizontal field changes...
Towards a Better Simulation of Sea States for Modelling of Coastal Structures
In the last fifteen years, techniques of wave generation have advanced to such an extent that it is now possible to exercise controls of parameters such as wave grouping, wave asymmetries,...
Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...
The Design and Construction of a Mass Armoured Breakwater at Hay Point, Australia
The design and construction of a prototype mass armored breakwater is briefly described. The paper also explores the practicality of allowing the progressive interaction of design, physical...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Return to search