Field Verification of Dem-Derived Watershed Response
Rainfall-runoff data from an NAEW Experimental Watershed are used to test the feasibility of deriving the watershed response from the digital elevation model of the watershed. Using Clark's...
Mixing Processes in the Dangava River Estuary
The aim of this report is to present main changes in the hydrology of the Daugava River estuary after its natural water flow became regulated and to present a simple physical model of...
SAMS: Software for Simulating Streamflow Series
This paper introduces SAMS, a computer software developed for the analysis, modeling, and generation of hydrologic time series such as annual and monthly streamfiows. It is written in...
Preliminary Validation of the MAC3D Numerical Flow Model
MAC3D is a recently developed numerical model for three-dimensional incompressible flow. Model predictions are compared with physical test data for a curved open channel and a multi-level...
A Finite Element Analysis of Mach Reflection by Using the Boussinesq Equation
The numerical analysis of Mach reflection, which is the reflection of an obliquely incident solitary wave by a vertical wail, is presented in this paper. For the mathematical model in...
3D Flow Structures?From Laboratory to Field Applications
One laboratory experiment and one field application have been modeled. For each one different sources of errors in the model results could be detected. It may be concluded that the applicability...
Accuracy of a 3D Hydrodynamic Model Verification due to the Relative Magnitude of Forcing Functions
An investigation of relative magnitude of forcing functions in a 3D time-varying hydrodynamic model verification has been performed by identifying some extreme forcing events for an estuarine...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...
Waste of Water Is Costly. Why Not Use an Accurate Flow Monitoring System?
Water becomes more and more a precious good. Therefore the exact measurement of flow of water, the management of water and process control in connection with water will become more and...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Evaluating Hydraulic Roughness in Tunnels
Much of the data presented in the literature on measured friction losses in tunnels are given in terms of the Darcy-Weisbach
Synchronized Measurements of Bed-Shear Stress and Flow Velocity in Open Channels with Simulated Vegetation
Synchronized measurements of shear stresses at the bed and velocities both within and above a simulated plant canopy in an open-channel flow are presented. Traditional (hot-film sensors)...
A New Technique for Measuring Vegetation Density
Detennination of the discharge capacity of a vegetated channel or floodplain requires a reasonable estimate of a flow resistance coefficient; such as Manning'
Two Dimensional Modeling of the Mobile River Delta and the Mobile Bay System
Two dimensional hydraulic modeling of Mobile Bay and the Mobile River Delta was conducted to determine critical hydraulic conditions for scour evaluations at bridges in the Mobile Bay...
Wetland Designs for Environmental Protection?Application in India
In many developing countries raw sewage are discharged into rivers and lakes. This practice causes severe degradation of regional water quality, and often results in serious public health...
The Use of an Equivalent Porosity Method to Model Flow in Marshes
Two dimensional modeling of marshes under unsteady flow conditions often involves description of sections that alternately wet and dry. The equivalent porosity method (King and Roig, 1988;...
Return to search