Building Better Bridges: Concrete Vs. Steel
The authors debate the merits of concrete segmental and steel bridge design and construction based on five criteria: initial and life-cycle costs; structural advantages; durability; construction...

The Diagnosis of Pavement Ills
The paper defines the 'health' of a road pavement in terms of parameters of serviceability, safety and structural integrity and defines 'illness' as any departure from 'healthy' values...

The Role of Nondestructive Testing in Assessing the Infrastructure Crisis
At present the role of nondestructive testing in the evaluation of infrastructure deterioration is an extremely limited one. In the Author's experience this is, in part, due to a reluctance...

Use of the Break-Off Method for the Evaluation of High Performance Concrete
The Break-Off test is one of the recent developments for testing in-place concrete strength. This research was undertaken to investigate the reliability of the Break-Off test as a measure...

Principles of Infrared Thermography and Application for Assessment of the Deterioration of the Bridge Deck at the Zoo Interchange
This paper details the principles of infrared thermography from the underlying theoretical considerations to the physical constraints involved with performing the test. Infrared (IR) thermography...

Masonry as a Structural Material
Four case studies are presented which illustrate the use of masonry as a structural material. Results of laboratory studies for unreinforced piers subjected to in-plane lateral forces,...

The SHRP-LTPP Asphalt Resilient Modulus Pilot Study
A SHRP asphalt concrete resilient modulus pilot study was initiated to provide important supplemental information related to the AC Mr program. Initially,...

Pavement Surface Maintenance: Overview of SHRP H-106 Experimental Installations
The Strategic Highway Research Program (SHRP) is currently conducting an experiment under SHRP project H-106 to evaluate the performance of various materials and procedures used in making...

Application of SMA Technology in Georgia
In 1991, the Georgia Department of Transportation participated in a cooperative effort with the Federal Highway Administration to conduct one of a series of field evaluations of Stone...

Consistency and Fairness in Geotextile Specifications
By clearly defining required material properties in terms of 'Minimum Average Roll Values' for routine quality control tests and 'Average Test Values in the Weakest Principal Direction'...

Realistic Specifications for Steel Bridge Painting
Specifications play a vital role in a steel bridge painting contract. They not only can ease problems with painting construction, but can also provide a common standard for all parties...

Bridge Deck Distress and Repairs
The primary cause of bridge deck deterioration are cyclic freeze-thaw exposures and reinforcing steel corrosion caused by the extensive use of de-icing salts. However, there are other...

Aerogel?A Transparent, Porous Superinsulator
Silica aerogel is an unusual, transparent, low density, thermally insulating solid useful for a variety of applications. We have been investigating silica aerogel for use in transparent...

Performance of Free Draining Base Course at Fort Campbell, Kentucky
In 1990 a free draining base course layer was constructed in the structural section of a pavement to be used as a military vehicle maintenance yard at Port Campbell, Kentucky. The Corps...

Rehabilitation of Chloride Damaged Concrete
There are several methods of rehabilitating structural concrete that must deal with the presence of chlorides. It is critical that the rehabilitation designer recognize the abilities of...

Innovations for NDT of Concrete Structures
The proposed paper presents three recent innovations for sonic and ultrasonic Non-Destructive Testing (NDT) of concrete structures which greatly increase the utility and speed of many...

Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...

Experimental Investigation of Self-Tapping Fasteners for Attachment of Corrugated Cladding Panels to Pultruded Fiber-Reinforced Plastics Beams in Industrial Building Construction
This paper describes an experimental investigation of self-tapping fasteners for the attachment of corrugated fiber-reinforced plastics (FRP) cladding panels to pultruded FRP beams. Although...

Tests of Full-Size Pultruded FRP Grating Reinforced Concrete Bridge Decks
Results of tests of full-size concrete bridge deck slabs reinforced with commercially produced pultruded fiber-reinforced plastic (FRP) gratings are presented. The slabs were designed...

Splice/Development Length Requirements for FRP Grids Used in the Structural Reinforcement of Concrete
The research presented in this paper program was directed towards determining development length and splice requirements for FRP grids used in the reinforcement of concrete structures....

 

 

 

 

Return to search