A Probabilistic Approach to Estimate Design Parameters for Flood Control Projects
The purpose of this paper is to provide engineering consultants with an improved method to estimate design parameters for various return periods in rural areas. The proposed method combines...
A Review of Fluid Movement in Compacted Clay: The Case of Macropore Flow
In constructing natural hydraulic barriers to infiltration, a typical design is one founded on the use of layers of compacted clay. Unfortunately, in analyzing the hydraulic performance...
Numerical Estimation of Macrodispersivities in Heterogeneous Self-similar Aquifers
Numerical simulations of contaminant transport in a stratified aquifer characterized by a self-similar distribution of hydraulic conductivity were performed. Macrodispersivities were calculated...
Simulation of the Propagation of Conserevative Contamination
The hydrodynamic model of the pollutant transport in water bodies was developed and adopted for Volga water supply system of Moscow, which includes five reservoirs and a channel. The model...
Lower Missouri River Water Quality Model for Evaluating Flow Alterations
A modified version of the US Environmental Protection Agency's (USEPA) one-dimensional (longitudinal) stream water quality model, QUAL2E, was applied to the lower Missouri River to evaluate...
Predicting Basin-Wide Tailwater Temperature Patterns by Combining Mechanistic and Statistical Water Quality Modeling
A simplified method for predicting water temperature patterns downstream of a peaking hydropower dam is described for the Fort Randall Dam tailwater of the mainstem Missouri River as part...
Water Quality Modeling of Lower Green Bay
The impact upon water quality of the planned expansion of a confined disposal facility (CDF) located in lower Green Bay was studied using numerical hydrodynamic and water quality models....
Additional Years of Record and Peak Discharge
The effect of additional years of stream gaging records is analyzed for stream gages in Nebraska. Frequency estimates are based on procedures outlined in Bulletin 17B, including skew coefficient...
An Operational GIS to Support State-Wide Hydrologic and Nonpoint Pollution Modeling
A geographic information system(GIS) that is structured for hydrologic and nonpoint pollution modeling(GISHYDRO) became operational in the Maryland State Highway Administration's Division...
A Lake Water Quality Management Model to Evaluate Stormwater Management
A research project was completed to develop a dynamic lake water quality management model for Lake Tarpon, a 10.3 km2, shallow lake in Central Florida....
New Directions in Integrated Hydrologic Modeling with GIS
In 1988, the Florida Institute of Phosphate Research funded a project to develop an integrated hydrologic model to more adequately represent mine reclamation hydrology. Five years later,...
Formulation of a Hydrologic Model, for Use with Remotely Sensed Data
Research is currently being conducted at the Pennsylvania State University, as well as, many other sites, in the area of Geographical Information Systems (GIS) and implementing its application...
Estimating Floodplain Limits for Complicated Hydrologic and Hydraulic Conditions
A new approach for estimating floodplain limits is shown. A hydraulic model with flood routing capabilities is coupled with a hydrologic model to compute river stages. Simulations are...
Technology Transfer to Developing Countries
The author describes three types of technology transfer programs that have been found to be effective in hydraulic engineering and other engineering disciplines and cites examples of how...
Mathematical Models for Reservoir Routing Analysis
Various mathematical models exist for the analysis of reservoir flood routing problems. This paper compares recent Runge-Kutta and Euler numerical techniques with the well known Puls approach...
An Integrated Software System for 3DFEMWATER: A 3D Grid Generator, A Graphical Post-Processor, and Additional Analysis Tools
An integrated software system for 3DFEMWATER has been developed to improve the groundwater flow modeling process. The system generates finite-element grids, graphically portrays simulation...
Modeling Two-Dimensional Subsurface Flow, Fate and Transport of Microbes and Chemicals
A two-dimensional model to simulate the subsurface flow, microbial growth-degradation, and transport and biodegradation of chemicals in groundwater environments (2DFATMIC) is developed....
A Two-Dimensional Flow and Hydrogeochemical Transport Model
A two-dimensional flow and hydrogeochemical transport model is designed for estimating the movement and attenuation of chemicals after they are released into subsurface systems. This model...
Probabilistic Calculation of Design Floods?SPEED
The probabilistic calculation of design floods was initiated in the 60s to overcome statistical calculation uncertainties. SPEED takes up and expands this original concept in the form...
Stormwater Infiltration Design Based on Rainfall Statistics and Soil Hydraulics
When comparing stormwater infiltration with other methods for stormwater drainage an appropriate design procedure is necessary. The method proposed for future Danish guidelines is based...
Return to search