ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Study on Hydrologic Response Via Channel Network Geomorphology
A drainage basin consists of slopes and channels. Slopes are the main fields at which rainfall input is converted into discharge. Stream-channels are the main fields at which the discharge...

Riprap Stability Results from Large Test Channel
Velocity data from a large test channel were used to determine the distribution of depth-averaged velocity and shear stress on the side slope of both straight and curved channels. From...

Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...

Sediment Concentration Measurements Below Small Headcuts
This study is designed to determine erosion rates downstream from a small headcut. The sediment concentration from a scour hole produced by a plunging jet is measured as a function of...

Variational Method in Fluvial Hydraulics?A Review
The theoretical base of the principle of minimum energy dissipation rate and other related stationarity hypotheses have been reviewed. Recent applications of the theory to the calculation...

Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...

Physical Modelling of Self Forming Alluvial Channels
A method is presented for the determination of a practicable physical model of self-forming channels in cohesionless alluvium. Both sand bed and gravel bed regime channels are considered....

Modification to John H. Overton Lock and Dam
The Red River Waterway Project, Mississippi River to Shreveport, Louisiana, will consist of a navigation channel 9 feet (2.7m) deep by 200 feet (61.0m) wide, 5 locks and dams providing...

Application of the Generalized Channel Routing Model
Using the linear full dynamic finite difference model the applicability of diffusion and kinematic wave models is investigated. Two dimensionless numbers are suggested for applicable range...

Conservation Properties of Flow Simulation Models
The fundamental equations of fluid mechanics and hydraulics posses certain integral properties which should be maintained by their discrete analogs. In this paper the conservation properties...

The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...

Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...

Computational Open-Channel Hydraulics for Movable-Bed Problems
As a major branch of computational hydraulics, notable advances have been made in numerical modeling of unsteady open-channel flow since the beginning of the computer age. According to...

Urban Soft Bottom Low Flow Channel?A New Approach
In 1987, the City of Boulder, Colorado requested assistance from the Urban Drainage and Flood Control District (District) to repair an all too familiar problem of cattails growing in the...

The Effect of Aeration on Scour
A vertical water jet was used to study the effects of entrained air, tailwater depth, size of bed material, jet diameter, and jet velocity on scour. Small amounts of entrained air were...

A Multimode Scheme of Characteristic Method for Open Channel Flows
This paper deals with the stability and accuracy of a multimode scheme, based on the method of characteristics, for unsteady one-dimensional open-channels flows. This scheme combines three...

Hermite-Galerkin Model for Dam-Break Floods
A model based on the finite element method using cubic Hermite basis functions and Galerkin weighting was formulated to solve the partial differential equations that govern unsteady one-dimensional...

Diffusion Wave Overland Flow Module
This paper documents the diffusion-wave overland flow module contained in the FORTRAN-callable routine OVERLAND. Subjects covered include the theoretical background, model formulation,...

Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...

The Calculation of Flushing Flows for Gravel and Cobble Bed Rivers
Flushing flows are needed to remove fines and sand from a gravel or cobble bed river. A natural stream will have periodic high flows adequate for flushing of fines and sand, but the hydraulic...

 

 

 

 

Return to search