Time-Dependent Damage and Creep of Brittle Rock
In this paper, some results of a combined analytical-experimental study of the relationship between subcritical microcrack growth due to stress corrosion and the time-dependent deformation...
Continuum Modeling of Discrete Structures with Geometric Nonlinearities
The modeling of geometrically non-linear discrete structures by an equivalent continuum is presented. The discrete-continuum analogy is developed by first isolating a unit cell of the...
Damage Detection in Periodic Structures
Nondestructive damage detection in periodic structures using continuum analogues of the discrete structure is studied. Algebraic equations relating changes in eigenfrequencies to the fractional...
The Hydroelectric Barge
The nation's inland waterway system includes many low head locks and dams, with undeveloped hydropower potential estimated in excess of 1,100 MW. For most of these dams, hydro...
The PowerBarge Hydroelectric Plant
Following an account of the need for such an approach, the PowerBarge hydroelectric plant design concept is described as a fully floating system consisting of an Intake Barge, Siphon Penstock,...
A Study of Deformations in Concrete Faced Rockfill Dams
This paper presents the results of studies on the behavior of certain concrete faced rockfill dams (CFRD), which were conducted during the Basic Design of Machadinho dam in Brazil. The...
Rockfill Compression Tests and Other Aspects of the Design of Miel I Dam
The Miel I Dam, a high concrete face rockfill dam, is one of the main structures designed for the Miel I Hydroelectric Project in Colombia. Selection of dam type was based on technical...
Effects of Streambed Processes on Interaction Between Surface and Groundwater
In open channel systems, the phenomena commonly referred to as 'clogging' is caused by settling of sediment and straining of suspended material as water moves...
Streamflow Losses in the Santa Cruz River, Arizona
The discharge and volume of flow in a peak decrease as the peak moves through an 89-mile (143 km) reach of the Santa Cruz River. An average of three peaks per year flow the length of the...
Damage Mechanics and Continuum Modeling
Historically, the structural and mechanical engineers are conditioned to model a material in a purely phenomenological sense with little or no regard to underlying physical phenomenon...
Engineering with Spreadsheets
With an electronic spreadsheet, the geotechnical engineer has a powerful tool for solving routine engineering problems. The ability of the electronic spreadsheet to use the calculus of...
Jointless Bridge Decks
Deck joints in a bridge are the source of many problems over its lifetime. In time, chances are good the joint will leak, permitting water and salt to leak through. Often this leads to...
Beam Analogy for Vertical Curves
The vertical curve is analyzed as a moment diagram for a uniformly loaded single beam with a concentrated moment at one end. This contributes some flexibility in approach, and enhances...
Fluid/Structure Interaction During Seismic Excitation
Hydrodynamic loading and other fluid/structure interaction effects need to be considered in the design of structures which contain, surround, or are submerged in fluids when subject to...
Probabilistic Mechanics and Structural Reliability
Computing in civil engineering has gone through serious adjustments in recent years. With the advent of computer-aided design and drafting systems (CAD) and microcomputers, computing capability...
Probabilistic Nature of Soil Properties
The integrity of a soil material is defined not only by its compositional components but also by the constituent natural bonds and the resultant interactions between the various constituents...
An Extreme-Value Model for Strength of Stiff Clays
The role of the distribution function in the safety analysis of soil structures is briefly discussed. Comparison of the two statistical distributions - normal and Weibull - reveals that...
Tunnelling in Soil and Rock
The relationship between tunnel design and construction is covered with emphasis on case histories of field measurements and performance. A general report emphasizes the importance of...
Update on Impact Effects in Nuclear Plants Part III?Review of Heavy Object Drop
The consequences of an accidental drop of a heavy component from a lifting device in a nuclear power plant are required to be evaluated even though the device may have been designed using...
State-of-the-Art of Development of Floor Spectra
Floor spectra are used as seismic inputs for the design and qualification of subsystems and equipment. Until very recently, the time history analyses with single acceleration time history...
Return to search