Foundation Engineering Constraints in Karst Terrane
Cavity-prone carbonate rocks are found in many Appalachian valleys and represent a poorly recognized hazard. This paper reviews the nature of the problem of founding above these Cambro-Ordovician...
Influence of Geologic Development on Horizontal Stress in Soil
Geologic history commonly controls the stress in natural soils, so that an understanding of the geology allows an assessment of the horizontal stress. This paper describes mechanistically...
Location of Geologic Discontinuities by Geophysical Techniques
An overview of the seismic refraction method and resistivity methods is given. These two geophysical techniques are integrated into a systematic method for locating geologic discontinuities...
Screw Plate Test for Drained and Undrained Soil Parameters
This paper describes a screw plate test device developed with a capability to measure the generation and dissipation of excess pore water pressure during testing in cohesive soils. The...
Some Dilatometer Test Results in Pennsylvania and New York
This paper starts with a brief introduction to the dilatometer and piezoblade. Test results in four different areas are presented. DMT soundings at LR 67057 (Legislative Route numbers...
Cyclic Behavior of Natural Overconsolidated Clay in Two Loading Modes
One-way, stress-controlled, cyclic triaxial compression tests were conducted on a heavily overconsolidated (Ko > 1), slickensided, natural clay with a view to modeling its cyclic...
First-Order Estimation of Ko in Sands and Clays
The in-situ horizontal stress coefficient (Ko) is known to be the dominant design parameter controlling the side resistance of deep foundations....
Collapsible Soils in the Antelope Valley�California
Soils subject to hydroconsolidation, commonly referred to as collapsible soils, have a potential to undergo significant volume reductions upon wetting, with or without additional loading...
Identification and Characterization of the Collapsing Alluvial Soils of the Western United States
Suggested procedures for the identification and characterization of the collapsing alluvial fan, mudflow and debris flow deposits of the arid and semi-arid parts of the western United...
State-of-the-Practice Mitigation Measures for Collapsible Soil Sites
Mitigative alternatives for collapsible soil sites are reviewed considering shallow, as well as deep, collapsible soil deposits. In the case of deep soil deposits the overburden pressures...
A Use of Geostatistics to Predict the Occurrence of Collapsing Soils
Collapse susceptible soils are those that are stable under load while they are dry, but undergo large decreases in volume virtually instantaneously, when they become wetted to near saturation...
Characterization of a Site Underlain by Deep Collapsing Soils
The geomorphic setting of a site underlain by an 80 ft (24 m) deep deposit of collapsing silty sand is described. The field and laboratory investigation completed to characterize the geotechnical...
Foundations on Expansive Soils in Northern Virginia
Thick layers of clayey silts (MH) were observed at several sites where townhouse developments were planned. These deposits had a high shrink swell potential. Maximum swell pressure tests...
Helical Bearing Plate Foundations for Underpinning
Helical anchor foundations have been used in construction to provide resistance against uplift and compressive loading for structures such as transmission towers, tied walls, pipelines,...
Design and Construction of Stone Column Reinforced Cofferdams
A recent expansion of the North Carolina State Port Facility, at Wilmington, involved the use of six cellular cofferdams as earth retaining structures during dredging and final filling...
Design Methodology for Foundations on Stone Columns
Stone columns offer the geotechnical engineer a valuable and viable technique for stabilizing sites underlain by soils ranging from soft clays to loose silty sands. A discussion of the...
Power Pole Foundations in Reclaimed Mining Area
In central Florida, where strip mining for phosphate ore is a primary industry, street surfaces often become rolling because of differential settlement, and electrical transmission poles...
Jet Grout Stabilization of Peaty Soils Under a Railway Embankment in Italy
The construction of two railway embankments on a peaty soil deposit up to 7m thick required a foundation improvement program meeting very strict specifications in terms of environmental...
Jet Grouting for Underpinning and Excavation Support
Jet Grouting as a new tool for underpinning and excavation support is presented, describing the systems of Jet Grouting and its advantages over conventional underpinning techniques. A...
Jet Grouting to Construct a Soilcrete Wall Using a Twin Stem System
An existing coal loading pier located in Norfolk, Virginia was completed in 1961 for the purpose of loading ocean going ships. It was determined that dredging adjacent to the pier would...
Return to search