Progressive Failure Probability of Soil Slopes Containing Geologic Anomalies
The variability in the redistribution of stress during sliding failure of a slope is first studied. Presence of a geologic anomaly is shown to affect the failure path pattern and likelihood...
Autocorrelation Functions for Offshore Geotechnical Data
Autocorrelation functions are described. Data from several North Sea sites are analyzed with respect to the vertical and horizontal autocorrelation of a number of soil properties. Based...
Bayesian Updating of Axial Capacity of Single Pile
The paper outlines a Bayesian technique to update predictions of pile driving and axial pile capacity on the basis of pile driving records. The approach enables one to systematically account...
Seismic Hazard Estimation in the Eastern U.S.
Probable seismic hazard is generally estimated considering five elements: 1) seismicity; 2) source radiation; 3) wave propagation (attenuation); 4) site response; and 5) ground failure....
Development of Fragility Curves for Liquefaction
The purpose of this study is to propose a methodology for evaluation of the degree of liquefaction potential and to demonstrate its applicability in constructing fragility curves for liquefaction...
Response Analysis of Crude Oil Transmission Systems
A preliminary analysis of the seismic response of continuous steel pipelines is presented. The Crude Oil Transmission System in the New Madrid Mo. area is choosen as an example. Assumptions...
Identification of a Site-Specific Ground Motion Model
The power spectral density and envelope function of earthquake ground accelerations at a site of interest are determined with the aid of system identification based on information predicted...
Analysis of Earthquake Response at a Site With Uncertain Properties
The problem of earthquake response of a soil deposit with uncertain properties is studied in the paper. Various analysis procedures for handling the dynamic response of an uncertain system...
Probabilistic Analysis of Soil Structures Using Finite Element Method
The authors have developed general-purpose stochastic finite element analysis system, which supports various types of correlation and computes safety index ? by first-order second-moment...
Stochastic Finite Element Analysis for Spatial Variations of Soil Properties Using Kriging Technique
When a reliability analysis for geotechnical problems is performed based on the stochastic finite element method, a proper estimation of spatial variation of soil properties is important...
Knowledge Representation and Reasoning in Structural Reliability Assessment Expert Systems: Implementation in the Leak-Before-Break Prototype System
Knowledge representation and reasoning, considered of a major importance for building and practical application of the structural reliabilty assessment expert systems, are the issues tackled...
Reliability-Based Analysis of Shallow Foundations
The effects of different parameters on the reliability of shallow foundations are examined. It is found that the footing depth, the footing length, and the load ratio have almost no effect...
Towards Reduction of the Vulnerability of Multi-Tank Storage Facilities
Accident scenarios in large scale industrial plants show that conventionally designed multi-tank storage facilities are susceptible to domino effects. With the aim to reduce the probability...
Seismic Reliability Analysis for Elevated Pressure Vessels
This paper presents two approaches for assessing the seismic reliability of elevated pressure vessels. A discretized mass mechanical system is used to model the dynamic effects of liquid...
Pressure Vessels for Space Station Freedom
Space Station Freedom (SSF) will utilize more than 10 different types of pressure vessels for storage of oxygen, hydrogen, nitrogen and mixed gases at operating pressures ranging from...
Downtown in Soft Ground
Critchfield and MacDonald describe the shield excavation of twin bus tunnels 21.25 ft in diameter and 5,000 ft long as part of the Downtown Seattle Transit Project. This $450 million project,...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...
Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Return to search