ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Reevaluation of Reinforced Concrete Slabs Subjected to Blast Effects
Failures in reinforced concrete shallow-buried structures subjected to the effects of severe dynamic loads are reevaluated by employing a modified Timoshenko beam formulation which includes...

Assessment of Transmission Line Foundations
Electric utilities are faced with the need to build new transmission lines or to upgrade existing lines to meet future demands. Because of economic constraints and the difficulty of obtaining...

Cracking the Fire Code
Local building codes specify fire resistance for members in buildings and other structures, and structural engineers select materials and assemblies that have passed a standard fire resistance...

The Church on Stilts
Christ Church Cathedral is an Anglican church situated in the heart of downtown Montreal. Constructed in 1859, it is a perfect example of English neogothic architecture, characterized...

Pressuremeter Evaluation of Glacial Till Bearing Capacity in Toronto Canada
Glacial tills were evaluated at three Toronto sites, using conventional methods, the pressuremeter and full scale caisson load tests. The geologic environment and specific subsurface conditions...

Influence of Geologic Development on Horizontal Stress in Soil
Geologic history commonly controls the stress in natural soils, so that an understanding of the geology allows an assessment of the horizontal stress. This paper describes mechanistically...

An Evaluation of Pile Design in Fraser River Delta Using In-Situ Tests
Modern methods of pile design often take advantage of in-situ test data. Thirteen axial pile capacity design methods have been evaluated using the results from eight full-scale pile load...

Cyclic Behavior of Natural Overconsolidated Clay in Two Loading Modes
One-way, stress-controlled, cyclic triaxial compression tests were conducted on a heavily overconsolidated (Ko > 1), slickensided, natural clay with a view to modeling its cyclic...

First-Order Estimation of K_o in Sands and Clays
The in-situ horizontal stress coefficient (K_o) is known to be the dominant design parameter controlling the side resistance of deep foundations....

Helical Bearing Plate Foundations for Underpinning
Helical anchor foundations have been used in construction to provide resistance against uplift and compressive loading for structures such as transmission towers, tied walls, pipelines,...

Jet Grouting to Construct a Soilcrete Wall Using a Twin Stem System
An existing coal loading pier located in Norfolk, Virginia was completed in 1961 for the purpose of loading ocean going ships. It was determined that dredging adjacent to the pier would...

Settlement Characteristics from Insitu Tests in Flyash Structural Fills
Flyash from the Baltimore Gas and Electric Company's plants was used to construct structural fills in thickness ranging from 5 to 25 feet (1.5m to 7.6m). Several warehouses...

Ground Modification for a 14-Story Structure Over a Deep Peat Deposit
The foundation design and construction for a 14-story reinforced concrete office building northwest of Minneapolis is described. The building's geometry provided unusual foundation...

Rock Excavation with Boom Mounted Hydraulic Impact Hammers
A hydraulic demolition hammer mounted on a common backhoe or excavator carrier has gained world wide acceptance in the construction industry as a viable alternative to blasting. This paper...

Model Tests for Bearing Capacity of Vertically Reinforced Foundations in Sand
Laboratory model test results for the bearing capacity of strip foundation supported by a sand layer with semi-flexible vertical rod reinforcements have been presented. All test results...

Tangent Modulus of Piles Determined from Strain Data
When evaluating measurements of strain or telltale shortening of a pile subjected to loading test, precise knowledge of the 'elastic' modulus is necessary. By means of plotting and analyzing...

Load Transfer in Deep Foundations Under Repeated Axial Loading
An analysis is presented of changes in axial load transfer for deep foundations under repeated loading, compared with static uplift and compression loading. Existing load test data demonstrate...

On the Critical Relative Displacement of Pile Shaft and Surrounding Soil
Model pile pull-out tests have been conducted to investigate the characteristics of the critical relative displacement at which the critical pile skin resistance is mobilized. Test results...

The Influence of Cyclic Loading on the Lateral Load Response of Groups of Piles
The effects of cyclic loading on the lateral response of closely spaced groups of piles has been widely considered to be a single pile phenomenon, related to gapping and scour around the...

Numerical Modeling of Interface Behavior for Drilled Shaft Foundations Under Generalized Loading
To evaluate soil-foundation interaction numerically, an isoparametric thin layer element is used within a 3-D, material nonlinear, general purpose geotechnical analysis system developed...

 

 

 

 

Return to search