Specifications for the Design and Construction of Composite Slabs and Commentary on Specifications for the Design and Construction of Composite Slabs
Composite slab construction is defined as a system comprising normal weight or lightweight structural concrete placed permanently over cold-formed steel decking in which the steel deck...
Advances in Fiber Reinforced Concrete
The idea of using strong discontinuous fibers as reinforcement for concrete seems to have been both a seduction and a challenge to many civil engineers. Adding the reinforcement to the...
Effect of Steel Fibers on the Cracking Behavior of Reinforced Concrete Continuous Beams
A research program was conducted with the aim of studying the cracking behavior of reinforced concrete continuous beams, as it is affected by using different combinations of main steel...
Rational Design of Beam-Columns in Steel
The paper discusses the procedure as currently recommended in the AISC Manual for selection of beam-columns in steel and points to the inadequacy of this procedure for quick convergence...
Unsymmetrically Reinforced Concrete Columns
The development of column strength formulas for unsymmetrically reinforced sections has been developed in previous papers. However, aids such as interaction diagrams have not been available...
Probabilistic Basis for Design Criteria in Reinforced Concrete
This collection of papers presents the results of research on the variability of reinforced concrete members carried out at the University of Alberta, Edmonton, Canada, during the period...
Connection Flexibility and Steel Frames
The papers included in this book introduce and present methodologies for the analysis and design of frames which take into account the effect of joint flexibility on the response characteristics...
Rehabilitation, Renovation, and Reconstruction of Buildings
This document constitutes the proceedings for a National Science Foundation funded workshop to discuss research needs pertaining to the buildings side of infrastructure. It includes discussion...
Slashing Tunnel Costs
The second U.S. application of the New Austrian Tunneling Method at Washington D.C.'s Metro system is described. The innovative method has been used overseas, but American...
Tunneling a Bridge
Linking an addition to the Georgia World Congress Center in Atlanta required a pedestrian tunnel through a railroad embankment 100 ft wide and 40 ft high, with no disruption of train service...
Advances in Short Span Steel Bridges
Applying recent research to the design of short span steel bridges can lower their cost and maintenance. Such research involves improved limit state criteria, more uniform lateral load...
Jointless Bridge Decks
Deck joints in a bridge are the source of many problems over its lifetime. In time, chances are good the joint will leak, permitting water and salt to leak through. Often this leads to...
Slurry Walls Protect Harvard Square
Harvard Square Station, Cambridge, Mass., had to be rebuilt when Boston's Red Line Subway was extended further out to the suburbs. For the first time, tied back slurry walls...
Beam Analogy for Vertical Curves
The vertical curve is analyzed as a moment diagram for a uniformly loaded single beam with a concentrated moment at one end. This contributes some flexibility in approach, and enhances...
Tunnel Shotcreting�Strength in Fibers
Steel fiber reinforced shotcrete (SFRS) costs less, has a lower rate of rebound and allows modern excavating equipment to advance with fewer interruptions than conventional shotcrete....
Engineering for Steel Construction
Structural Steel Details: Comments on Divided Responsibility
Five readers responded to an article on responsibility for structural steel details published in
Reinforcing Roof Truss Frames Under Load
Without altering the roof structure of an industrial boiler plant, a long-span steel truss frame was modified in place to support heavier loads. The owners of an industrial boiler plant...
Steel Girder Bridge Sets Record Length
The Veterans Memorial Bridge at Ottawa, Ill., is the longest plate girder, stringer type bridge in the country with spans of 385, 510 and 305 ft. Value engineering played an important...
Seismic Risk and Decision Analysis of Lifeline Systems
This paper provides general guidelines for performing lifeline seismic risk and decision analyses. Relevant input models are introduced as they support the performance of component and...
Return to search