The Prefab Tunnel
Jacking a prefabricated concrete arch through a railroad embankment to provide a new access ramp to the Don Valley Parkway in Toronto was done for the first time in North America. In September...
Tales From Milwaukee's Underground
Written from RETC papers and interviews, this article is a status update on the Milwaukee Metropolitan Sewerage District's $2.1 billion Water Pollution Abatement program,...
Advances in Pipeline Materials and Design in Europe and North America
This paper presents an overview of various developments in materials technology and design procedures in the Western Hemisphere over the last 20 years. Some projections for anticipated...
Earth Pressure Acting on Buried Flexible Pipes in Centrifuged Models
Distributions of both normal and tangential earth pressures acting on three flexible model pipes having different wall thicknesses were successfully measured in centrifuge model tests....
Recent Advances in Structural Rehabilitation Techniques for Underground Sewer Pipelines
A great challenge for the coming years, if not decades, will be the repair, renovation and renewal of the existing sewerage systems in the Federal Republic of Germany in the interest of...
Evaluating Thermal Pressure Changes in Liquid Packed Piping
Theoretical and practical issues involved with the phenomenon of thermally induced pressure change in closed piping systems are investigated. The mathematical derivation of the applicable...
Safety Assessment of Welded Pipelines Undergoing Large Ground Deformation
Spatial distribution and modelling of liquefaction induced permanent large ground deformation are presented. The permanent large ground displacement patterns required for the safety assessment...
Prestressed Concrete Pipe Field Test
Strain changes in the prestressing wires and deflections of a 2130-mm-diameter precast (embedded cylinder), prestressed concrete pipe were measured during earth backfilling operations....
Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...
Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Short-Term Versus Long-Term Pipe Ring Stiffness in the Design of Buried Plastic Sewer Pipes
It is often discussed which pipe ring stiffness should be used when designing the long-term deflection of buried plastic sewer pipes; the short-term value or the long-term value? As the...
Advances in Trenchless Sewer System Reconstruction
The new developments and refinements in trenchless reconstruction technologies now permit total sewer system rebuilding of collectors, interceptors, manholes, service laterals, and force...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Investigation & Rehabilitation of Seattle's Tolt Pipeline
Seattle Water Department's Tolt Pipeline brings water 24 miles from storage in the Cascade Mountains into city and suburban distribution systems. Twenty-three miles of this...
Pipeline Leak Detection and Location
A real time pipeline leak detection and location system has been developed. This system consists of a numerical model for transient flow, two sets of pressure and flow measurement equipment,...
Valve Control to Avoid Column Separation in a Pipe
Maximum pressures in a pipeline can be reduced significantly by closing the valve in an optimal manner. Such an optimal valve closure policy may result in some situations in minimum pressures...
Stress Relaxation Characteristics of the HDPE Pipe-Soil System
All piping materials and soils are subject to viscoelastic behavior such as stress relaxation and creep. The combination of soil and pipe viscoelastic properties determine the time-dependent...
In-Situ Evaluation of 30-In. (762-mm) Diameter Prestressed Concrete Lined-Cylinder Pipeline
The results of an extensive investigation to evaluate the in-service condition and future serviceability of an existing lake water make-up pipeline are briefly described herein. The pipeline...
Combined Load Testing of Prestressed Concrete Cylinder Pipe
A series of combined load tests were run on prestressed concrete cylinder pipe in order to evaluate a proposed new method of design for pipe made to AWWA Standard C301. These tests involved...
Return to search