Reliability-Based Assessment of Corps Structures
Due to the limited amount of funding available for maintenance, rehabilitation, and replacement of aging Corps structures, the director of civil works, Headquarters, U.S. Army Corps of...
Flood Loss Assessment with Integrated Measures
In most cases, the maximum flood loss reduction can be achieved only by an optimal combination of both structural and nonstructural measures. An integrative approach that combines the...
Risk and Reliability of Water Resources Infrastructure and Engineering Approaches to Risk and Reliability Analysis
The paper summarizes the second session of the conference which discussed the risk and reliability of water resources infrastructure as well as engineering approaches to risk and reliability...
Risk Management Strategies for Natural, Manmade, and Technological Hazards
The sixth session featured three important applications of risk and reliability analysis in water resources planning. Papers were presented on incentives to use reliability and risk analysis...
A Study of Alkalinity Leaching and Residual Strength of Alkaline Stabilized Sludge
The addition of sufficient amounts of quicklime or other alkaline earth oxides to dewatered sludge raises both the pH and temperature of the sludge, resulting in microbial inactivation....
Modeling of Chemical Inhibition of Nitrification
This work contains two quantitative structure-activity relationships (QSARs) modeling chemical inhibition of nitrification, one for heterocyclic compounds and one for acetylenic materials....
Assessing the Reliability of Low Pressure Membrane Systems for Microbial Removal
Low pressure membrane systems are used for microorganisms control in water treatment processes. In this article, the efficiency and reliability of this process is evaluated. Microorganism...
Using Drop Structures for Stream Gaging
A long term monitoring program of 15 watersheds, for the purpose of studying channel response to erosion control measures being constructed in north Mississippi, is being conducted by...
Experimental Design and Measurement Techniques for Investigation of Two-Phase Flow
Discussing the relevant hydraulical and inter-phasial processes of two-phase flow in open tanks the necessary requirements for set-up and operation of physical model studies are worked...
High-speed Video Analysis of Sediment-Turbulence Interaction
Results from the analysis of high-speed video recordings of particle motion and simultaneous flow visualizations in the near wall region of a turbulent open channel flow are presented....
Damage to Highway Infrastructure 1993 Mississippi River Basin Flooding
A study has been initiated to investigate the basin-wide impact of the 1993 Mississippi River Basin flooding on damage to the highway infrastructure. The study involves site investigations...
Hydraulic Design of Spillway Plunge Pool Linings
The design of plunge pools for high head spillways with flip bucket terminal structures often requires a detailed examination of the stability of the resulting scour hole in the river...
Estimation of Spillway Free Jet Trajectory Lengths
The design of high head spillways with flip bucket terminal structures must include analysis of the length of the free jet issuing from the spillway. Prototype jet trajectory lengths are...
Using the Weir Back as an Energy Dissipator
The effect of weir back in energy dissipation is investigated experimentally and theoretically. The study includes four different shapes of weir back. The boundary friction force and the...
Design Considerations for Use of Wedge Wire Screens at Surface Water Intake Structures
This paper provides the suggested guidelines for design, construction, operation and maintenance of wedge-shaped wire cylindrical screens used for aquatic biota and trash and debris screening...
Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
One- and Two-Dimensional Analysis of Flow in Hotophia Creek, MS
A numerical experiment on the influence of a sand bar encroachment on the stream flow pattern is reported. The results of a two-dimensional analysis were compared with results of an equivalent...
Steep Constructed Stream Channels and Chutes
Research and technology transfer needs are described for steep stream channels and chutes. Iterative processes are presented for design and construction of bouldery channels and chutes...
Return to search