Effect of Microporosity on Notched Specimen Fatigue Life
The present work examines notched fatigue performance of aluminum alloy 7050-T7451 thick plate containing microporosity. Open hole fatigue specimens from low microporosity and high microporosity...
Reliability Synthesis of CFRP Laminated Plate
The paper presents a formulation of shift synthesis to improve the reliability of fiber reinforced plastic (FRP) laminated plates with uncertain elastic constants and lamina strength....
Damage Prediction in Laminated Composites with Continuum Damage Mechanics
A finite element model is developed for laminated composite plates experiencing fatigue load induced microstructural damage. Continuum damage mechanics based constitutive relationships,...
Significance of Yield Surface Corner-Like Effects in Inelastic Stability Solutions
This paper presents the author's experiences with finite element prediction of the inelastic stability of steel plate structures. The implications of linear versus nonlinear...
Behavior of Plates Under Partial Edge Loading
This paper addresses one of the common problems in designing thin-walled members, the ability of the shape to accommodate in-plane concentrated loads. Specific areas in which the problem...
Local Buckling Behavior of Plate Elements
In the elastic post-local buckling range, the stress distribution across the width of compression elements of light gauge steel shapes is nonlinear. For code implementations, these stress...
Simple Methods for Design of Steel Gusset Plates
This paper presents two simple methods for design of steel gusset plates. In the first method, the wedge theories are applied to establish state of stress in steel gusset plates. In the...
Optimum Design of Tapered Tubular Members
An algorithm for designing a tubular structural member with constant taper is presented. The design criterion is that the maximum absolute stress produced by a set of loading conditions...
End Plate Moment Connections for Cyclic Loads
Three pilot tests of full size end plate moment connections under cyclic loading are discussed. In one of the specimens, the premature fracture of one of the inner bolts suggests the possibility...
Tripping and Strength of Asymmetrical Plate Stiffeners
Tripping (lateral-torsional buckling) of symmetrical or asymmetrical plate stiffeners can be analyzed by using differential equations or energy formulation. An analytical study is reported...
Modeling of Plate and Shell Structures with
Finite element models for the analysis of plates and shells, based on the concept of hp-extension are presented. A methodology for the control and analysis of the error of the finite element...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
Fatigue Evaluation of a Riveted Railroad Bridge
An 83 year old railroad bridge was analyzed for fatigue based on historical records such as the original schedules. Based on the number of cycles to date, corresponding to an effective...
The Fatigue Performance of Welded Joints in a Marine Environment
The fatigue lives of plate-plate, pipe-plate, and tubular welded joints tested in seawater under free corrosion, optimum cathodic protection and cathodic overprotection measured in the...
Behavior of Externally Prestressed Concrete Girders
A new technique for prestressing concrete girders is presented. The girders are externally prestressed by epoxy-bonding fiber-composite plates to the tension flange of the cambered girders....
Consequences and Achievement of Supplemental Damping for Improved Seismic Performance
An earthquake resistant design philosophy which relies upon increased stiffness and damping rather than increased strength and ductility has been investigated. The effect of adding supplemental...
Static Tilt Analyses of Uplifting Cylindrical Tank
This paper describes the general method adopted for predicting the static tilt performance of cylindrical liquid storage tank that is free to uplift. In the analysis described here, the...
Helical Bearing Plate Foundations for Underpinning
Helical anchor foundations have been used in construction to provide resistance against uplift and compressive loading for structures such as transmission towers, tied walls, pipelines,...
Boundary Element Methods in Structural Analysis
Tutorial and state-of-art aspects of the Boundary Element Method (BEM) are combined with applications in structural analysis in order to provide information about the advantages of this...
Canvas Covered Bellani Plate Atmometer
Crop water use information is essential for sound water management and conservation in irrigated agriculture. Many water management technologies are often inapplicable until accurate and...
Return to search