Fatigue Design and Reliability Analysis of CFRP Composites
The statistical fatigue properties of unidirectional (UD) T800/3631 carbon/epoxy composite laminates are investigated in this paper. Fatigue tests were conducted under rotating bending....
Reliability of Plastic Slabs
In the paper it is shown how upper and lower bounds for the reliability of plastic slabs can be determined. For the fundamental case it is shown that optimal bounds of a deterministic...
Ambiguities and Inanations of Current Plastic Pipe Specifications
This paper discusses current specifications, including materials for plastic pipe as compared to other pipe specifications, including rigid pipe materials. It discusses the ambiguities...
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Short-Term Versus Long-Term Pipe Ring Stiffness in the Design of Buried Plastic Sewer Pipes
It is often discussed which pipe ring stiffness should be used when designing the long-term deflection of buried plastic sewer pipes; the short-term value or the long-term value? As the...
Advances in Trenchless Sewer System Reconstruction
The new developments and refinements in trenchless reconstruction technologies now permit total sewer system rebuilding of collectors, interceptors, manholes, service laterals, and force...
Review of PIM (Pipeline Insertion Method) Technology
The U.S. Army Construction Engineering Research Laboratory (USACERL) conducted the first demonstration of PIM (Pipeline Insertion Method, formerly Pipe Insertion Machine) technology for...
Stress Relaxation Characteristics of the HDPE Pipe-Soil System
All piping materials and soils are subject to viscoelastic behavior such as stress relaxation and creep. The combination of soil and pipe viscoelastic properties determine the time-dependent...
Whatever Happened to Long-Term Bridge Design?
The Chairman of the Board of one of the leading engineering firms in the nation ponders the future of American bridges. In today's designing of bridges, Thomas R. Kuesel points...
Performance of Pipe Spillways for Dams
The Soil Conservation Service has used several different kinds of pipe products for spillway conduits of dams. Materials with a shorter estimated life are used for smaller low hazard dams...
Pipeline Design and Construction Using High Density Polyethylene (HDPE) Pipe
All pipelines and pipe materials must be designed and constructed to address the limitations of the pipe and fittings in order to insure acceptable performance of the line. Conventional...
Cheyenne Stage II Water Delivery Pipeline and Shoshone Municipal Water Supply Pipeline
This paper deals with the design and construction aspects of two pipeline projects in Wyoming. Located in southeastern Wyoming, the Cheyenne Stage II Water Delivery Pipeline consists of...
Corrosion Protection of Cast Iron and Ductile Iron Pipe, San Diego, California
This paper addresses the use of a loose unbonded plastic covering polyethylene encasement for protection of cast and ductile iron pipe in an extremely corrosive soil. The case study in...
Landfill Gas Pipe Selection and Installation
Sanitary landfills present a unique array of pipe selection and installation criteria when designing landfill gas (LFG) control and recovery systems. Factors that must be considered include...
The New Generation of Pipeline Rehabilitation
The new advancements in pipelines reconstruction technologies now permit total sewer system rebuilding of collectors, drainlines, manholes, service laterals, and force mains without excavation....
Technical Work on Flexible Pipe/Soil Interaction Overview?1990
Research in the laboratory and field have been ongoing for the past seventy years on flexible pipe/soil interaction. Virtually all of the early work was done on steel pipe. During the...
A Materials Study of Interleaved Bismaleimide Composites
One approach for improving damage tolerance in epoxy based composites involves interleafing of tough adhesive layers between plies of the composite prior to fabrication. Extension of this...
Design of Fiberglass Reinforced Plastic Underground Storage Tanks
The purpose of this paper is to discuss the design and construction techniques of fiberglass composite underground storage tanks. The scope of this paper is limited to the straight shell...
Time-Dependent Behavior of FRP Lintels
This paper describes an experimental investigation into the short-term and long-term behaviors of two types of T-shaped lintels made of fiber-glass reinforced plastic with polyester or...
Load-Deflection Performance of FRP Molded Grating
This research project deals with fiberglass reinforced plastic (FRP) molded grating, its properties, manufacturing materials used and appearance. Grating strength, configuration, weight...
Return to search