Shear Design Guidelines for Polyester Concrete Using Recycled Plastic
Previous research on the shear behavior of steel-reinforced polymer concrete (PC) beams has been very limited and no efficient design procedures have been proposed. In all the previous...
Special Considerations in the Design of Connections for Recycled Wood/Plastic Composite Lumber
There is current work in the American Society for Testing and Materials (ASTM) to evaluate potential test methods for what they refer to as 'commingled' plastic lumber. This category covers...
Design Implications of Advanced Analysis in LRFD
This paper discusses two advanced analysis methods, and their use in LRFD format. The first approach is called the notional load plastic hinge method and the second is called the second-order...
Testing of Concrete Curtain Wall Panels Reinforced with FRP Grids
The objective of this paper is to evaluate the suitability of Fiber Reinforced Plastic (FRP) grids for use as a structural; reinforcement in concrete curtain wall panels. This paper describes...
Structural Tests on the Suspen-Dome System
The 'suspen-dome' system, which the authors have developed, consists of a single-layer truss dome and a cable structure. The present paper deals with the results of structural tests conducted...
Elasto - Plastic Analysis of Cable Net Structures
This paper presents a Newton-Raphson interaction technique which takes account of plastic cable strains while iterating on the nodal equilibrium equations of cable net structures. The...
How to Optimize Frames Using Plastic Design Concept
An optimal design procedure using plastic design concept was presented. For low-rise building frames, optimal plastic designs can be made using the plastic limit load as a basis of design....
Implementation of Elastic Layered Theory for Design of Unbonded Overlays
The U.S. Army and Air Force have implemented the elastic layered theory for design of unbonded overlays for rigid airfield pavements. The procedure allows for design of unbonded overlays...
Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
Computer-Based Advisors for Environmentally Conscious Green Product Design
We report on several experimental systems intended to provide such assistance. One system intended to provide direct design advice is described in more detail. It was developed by including...
Prediction of Ground Deformations Due to Excavation-Application to Tunnel Lining Design in Weak Rock
Prediction of ground deformations due to excavations is simulated by three dimensional non-linear finite element analyses. It considers various in-situ ground stress levels, excavation...
Measured Downdrag on Seven Coated and Uncoated Piles in New Orleans
A site outside of New Orleans, Louisiana was selected as part of a research effort to study the phenomenon of downdrag on bitumen-coated piles. Two steel pipe piles, two timber piles,...
In Situ Treatment of VOCs by Recirculation Technologies
Confronted with contaminated land from the world wars and the postwar industrialization period, German researchers and practicing professionals have worked to develop processes for effective...
Hydraulic Model Studies of Recessed Curb Inlets and Bridge Drains
A large hydraulic model (64 ft long by 10.5 ft wide) was used to test several geometries of recessed curb inlets and three types of bridge drains. Testing was at 3/4 scale for the recessed...
Velocity Control Rings for RC Pipe on Steep Slopes
This paper discusses the use of internal concrete rings to reduce velocity and concrete erosion for reinforced concrete pipes on steep slopes in the Southern California area....
Laplace Valve Stroking for Complex Piping Systems
LaPlace valve stroking to control water hammer is applied in complex piping systems with friction and without friction. Two types of system are analyzed. The law of operation of the valves...
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
This publication, Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD), (ASCE 15-93), is applicable to buried concrete precast pipe intended...
Upgrading Dubai's Sewers
The sewerage system serving the city of Dubai in the United Arab Emirates, is plagued with odor and corrosion problems. System elements were deteriorating and failure rates were increasing....
America's Pavements: World's Longest Bathtubs
Pavements are the most unusual structures designed by civil engineers. Water flows through their tops, bottoms and sides but because pavements are relatively flat, flows out again very...
Return to search