Dynamic Analysis of Unstable Structural Systems With Prescribed Velocities
Structural systems that have large inextentional deformation, or in other words, deformation without stain are called 'Unstable Structural Systems.' They include cable structures, membrane...
Response of Truss Structures Subjected to Dynamic Loads During Member Failure
The paper presents a method for and results from an investigation of the response of a truss structure during the chain reaction of its member failure while subjected to external static...
Dynamic Characteristics of Translational Lattice Domes
The feasibility of using lattice domes of various shapes generated by translating a variety of parametric polygons is illustrated and the dynamic characteristics of these lattices determined....
Damage Prediction in Reinforced Concrete Structures under Cyclic Loading
Assessment of the stiffness, resistance and damage behaviour of reinforced concrete members under high cyclic loading due to earthquake actions must consider material nonlinear effects...
Blast Demolition of Reinforced Concrete Industrial Chimneys
On some of recently demolished chimneys, transient measurements were taken, in the vicinity of the tilting hinge, during the process of falling down. Thus, corresponding dynamic computational...
Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...
Imperfections and Thin-Walled Bars Behaviour
Experimental and theoretical observations allowed us to present some new conclusions concerning the proper, and safe designing of the structures composed of thin-walled bars (TWB). These...
Comparison of Two different Models of a Shell Roof
The main purpose of this study is to compare a physical model of a shell roof with a theoretical model of the same shell roof in order to verify the reliability of the Homeostatic Model...
Sensitivity and Optimum Structural Design
Modern design requires more advanced considerations leading to light and safe structures. One of the way to reach this aim is through structural optimization. Today's computational possibilities...
Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...
Possibilities and Problems of Latticed Structures
Several fundamental aspects of space frames which are sometimes referred to as latticed structures are discussed. Terminology of the structural system is first considered. Special features...
Project Case Study: Space Frame Roof Structure, Main Stadium, Shah Alam Sport Complex, Selangor, Malaysia
In the city of Shah Alam located just outside of Kuala Lumpur, the Shah Alam Sport Complex is built as a multi-use sports facility. The aim of this study is to discuss the management of...
Structural Tests on the Suspen-Dome System
The 'suspen-dome' system, which the authors have developed, consists of a single-layer truss dome and a cable structure. The present paper deals with the results of structural tests conducted...
Design of Low Rise Dome for the University of Hawaii at Manoa
The 97.5m span dome covering the new multipurpose sports arena at the University of Hawaii in Manoa is a spherical, triangulated dome structure with a rise of 16.2m. In addition to the...
Analysis and Design of a Double Layer Barrel Vault with a Large Span
The roof of coal storage in JiaXin Power Station is a double-layer barrel vault. This roof covers span of 103.5 M and a longitudinal span of 88.0 M. The height of this space truss is 3.5...
Structural Integrity of Space Trusses
Space trusses of the double layer grid configuration can experience rapid propagation of failure in the ultimate load condition and thus are potentially vulnerable to progressive collapse...
Optimization of Space Lattice Structures with Multimodal Frequency Constraints
The paper presents an optimization algorithm for the design of space trusses subjected to constant value constraint. The goal of the optimization is a structure of the highest multiple...
Optimal Design Conception of Grid Domes in Practice
In this paper, the optimal design conception of grid domes in practice is presented. The classical dome shell structures covering some irregular boundaries often seems not to be satisfied...
Explorations in Geodesic Forms
Geodesic forms constitute an important family of structural systems. The objective of the paper is to show how the concepts of a mathematical tool called formex algebra and its programming...
Discrete Field Stability Analysis of X-Braced Lattices
The three-dimensional X-braced lattice is used as a compression member in structures ranging from the long span roof of buildings to radio and television antennas. In such cases the design...
Return to search