Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...
The Design and Construction of a Mass Armoured Breakwater at Hay Point, Australia
The design and construction of a prototype mass armored breakwater is briefly described. The paper also explores the practicality of allowing the progressive interaction of design, physical...
Performance of a Berm Roundhead in the St. George Breakwater System
A new harbor under construction on St. George Island in Alaska's Bering Sea is using the berm breakwater concept for protection from wave attack. Three breakwaters are included...
Implementation and Performance of Berm Breakwater Design at Racine, WI
A large berm-type breakwater has been constructed at the entrance to Racine Harbor, Wisconsin, on the western shore of Lake Michigan. The breakwater is approximately 450 feet long, in...
Berm Type Armor Protection for a Runway Extension at Unalaska, Alaska
A proposed runway extension located on the Aleutian islands was designed to withstand forces of Bering Sea storm generated waves using a unique armor protection concept. The proposed runway...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Berm Breakwaters
Unconventional Rubble-Mound Breakwaters
This book presents a state-of-the-art review of the design, analysis, hydraulic model testing, and prototype experience of a new class of coastal structures that produce economical designs...
Breakwater Breakthrough�Bold New Breakwaters
A new rubble-mound breakwater design is a departure from the conventional approach detailed in the U.S. Army Corps of Engineers Shore Protection Manual. The new concept, called the berm...
Design of Breakwaters for Hurricane Wave Attack
The breakwaters protecting Port of Haina in the Dominican Republic have been repeatedly damaged by hurricane storm waves. Attempt to repair the destroyed portions have been largely unsuccessful....
St. George Harbor?A Berm Breakwater Solution in Alaska's Bering Sea
The berm breakwater concept is based on the premise that locally available materials should be used in breakwater construction to the largest degree possible. By looking at failure dynamics...
Design Features of the Elliott Bay Marina
The paper presents a summary of the major coastal engineering design features of a new Puget Sound small craft harbor proposed for construction within the City of Seattle. The 1,200 berth...
Construction of Fisherman's Wharf Breakwater
The San Francisco District of the United States Army Corps of Engineers recently completed construction of a breakwater at Fisherman's Wharf. The construction, completed ahead...
Artificial Beach Design, Lake Forest, Illinois
A system of beaches and offshore breakwaters was designed to protect eroding bluffs along the shoreline of the City of Lake Forest. The beach system consists of sand fill contained by...
Influence on the Extension of Ondarroa Harbor on Adjacent Beaches
The present article deals with the analysis of the influence of the different Ondarroa Harbour extensions on the adjacent beaches by using a semi-movable model test. These model tests...
Armor Protection for Rubble Mound Breakwaters
A brief summary of past practices in breakwater armor system design is presented. The limitations of current design procedures for rubble mound breakwaters are discussed and improved methods...
Drop Test of Dolos Armor Units
Dolosse are concrete armor units used for the cover layer on many breakwaters and jetties. In order to study their complex loads and structural response, a prototype study at Crescent...
An OCEANWHEEL Breakwater
The compression wall and tension spoke structural system (OCEANWHEEL) transfers lateral loads from sea surface to seafloor efficiently. It promises a wide variety of uses beyond the described...
Port Expansion of Eastport, Maine
A recent pier expansion now allows Eastport to provide 40 feet of water at low tide. The pier expansion consists of a concrete-decked steel pipe pile-supported extension to an existing...
Perforated Wave Barriers in Small Boat Piers
Perforated breakwaters can be used to reduce the energy and the height of waves entering small boat harbors. By not extending the breakwater to the bottom interference with littoral drift...
Return to search