Seismic Considerations in Sealing a Potential High-Level Radioactive Waste Repository
The potential repository system is intended to isolate high-level radioactive waste at Yucca Mountain according to the performance objective - 10 CFR 60.112. One subsystem that may contribute...
Options for Dynamic Analyses of Underground Facilities
Continuum and discontinuum modeling techniques for conducting dynamic analysis of underground facilities of geologic repository are discussed. Compared with continuum analysis, the discontinuum...
Dynamic Response of Tunnels in Jointed Rocks
We describe the application of the Discrete Element Method (DEM) to the dynamic analysis of the response of tunnels in jointed rocks to earthquake loading. In situations where large motions...
Guidelines for the Development of Natural Phenomena Hazards Design Criteria for Surface Facilities
This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear...
Wind Engineering?Engineering for Wind Damage Mitigation
The establishment in 1970 of a new engineering discipline, wind engineering, was motivated by property damage caused by windstorms of 1970 known as the Lubbock Tornado and Hurricane Celia....
Controlling the Seismic Behavior of Precast Concrete
Precast concrete has, through the years the years, acquired a bad reputation insofar as its ability to withstand earthquake is concerned. This reputation, though reasonably based, is not...
Analytical Platform Development for Precast Structural Systems
The multi-investigator PRESS (Precast Seismic Structural Systems) research project requires an analysis tool that can be used to perform nonlinear seismic analyses of a wide variety of...
Inelastic Behavior and Seismic Design of a Highway Shield Tunnel
Nonlinear behavior of shield tunnels required for seismic design by means of Seismic Deformation Method is presented based on dynamic loading tests. Application of the test results to...
Nonlienar Seismic Response Analysis of Shanghai Yangpu Bridge
The Yangpu Bridge is a long-span composite cable-stayed Bridge in which the superstructures is designed as a floating system to withstand the strong earthquakes. The nonlinear seismic...
Improved Torsional Analysis Procedure for Single Story Structures Subjected to Seismic Motion
An analytical procedure is developed that enables designers utilizing the UBC planar lateral force procedure to accurately account for the additional lateral response due to torsion without...
Three-Dimensional Simulations of Ground Motions in Sedimentary Basins
This report describes work being done at the U.S. Geological Survey on 3-D simulations of earthquake ground motions in sedimentary basins. The ultimate goal of this research is to predict...
Dynamic Field Response Studies and Earthauqke Instrumentation of the Meloland Road Overcrossing
Ambient vibration data was obtained at the Meloland Road Overcrossing near El Centro in California by The California Department of Transportation (CALTRANS) as part of a 1978 Federal Highway...
System Identification of the Meloland Overcrossing Using Static and Dynamic Field Data
A system identification study was performed using a computer finite element bridge model and measured static and dynamic response data obtained from full-scale quick-release ram field...
A General Hysteresis Model for Wood Structures
To predict the dynamic response of a wood structure, its energy dissipation mechanism and hysteresis behavior must be appropriately modeled. This paper presents a new hysteresis model...
Effects of Drifting on Snow Loads on Large Roofs
In areas that experience significant snow fall, snow loads typically produce the governing environmental load cases for a large span roof. Therefore for large span roofs there are considerable...
Wind Loads on Arena Roofs Using Aerodynamic Models
The concept behind an aerodynamic wind tunnel model used to predict dynamic response to wind excitation is the generalized load in a particular natural mode of vibration is measured ,...
85 Stories in Kuala Lumpur?The 5th and 6th Tallest Buildings in the World
A concrete core and cylindrical concrete tube structure provides a safe, elegant, efficient and constructible solution to the challenge of designing the world's 5th and 6th tallest buildings,...
Predicting Turbine-Generator Foundation Vibrations
Two of the major considerations in the design of large turbine-generator foundations are to maintain the proper shaft alignment and to limit the vibration of the machine during operation....
Dynamic In-Plane Racking Tests of Curtain Wall Glass Components
This paper is concerned with the seismic performance of 'architectural.' or 'non-structural' building elements such as glass elements in curtain wall systems. A pilot study was undertaken...
Response of Equipment in Structures Supported on Resilient-Friction Base Isolators Subjected to Ground Motion
In this paper, the response of equipment in structures on a particular friction-type device, the resilient-friction base isolator, is examined. The R-FBI is composed of layers of Teflon...
Return to search