Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...
Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...
JSC-1: A New Lunar Soil Simulant
A new lunar soil simulant, JSC-1, has been developed and characterized under the auspices of the NASA Johnson Space Center. This simulant was produced in large quantities to satisfy the...
Spacecab: A Concept for Commercial Human Spaceflight
This paper will describe the Spacecab conceptual design and operational scenario. Spacecab is not necessarily a unique design solution but it does illustrate a design philosophy that differs...
Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...
Test Experience with Heavy Angle Dead End Lattice Transmission Towers
During the past three years, the Electric Power Research Institute's Transmission Line Mechanical Research Center has conducted full scale tests on three 500kV heavy angle dead end lattice...
Response of Stressed Timber T - and Box-Beam Bridges
The objective of this study is to establish the strength, stiffness, and transverse load distribution factors of stressed timber T-, Bulk T-, and Box-beam bridge systems. To achieve the...
Dynamic Testing of Unreinforced Brick Masonry Infills
A significant seismic hazard may exist when unreinforced masonry infill panels fall out of their surrounding frames as a result of excessive accelerations applied normal to their plane....
Uplift Resistance of Plywood and OSB Roof Sheathing
A test program to determine the resistance of plywood and OSB roof sheathing to uplift pressures created by wind flowing over a residential roof structure will provide valuable data to...
Time-Dependent Load-Distribution Behavior of Parallel-Member Wood Systems
The effect of differential member creep on the load-distribution behavior of parallel-member wood systems is examined. Variability in the creep response of the individual component members...
A Probabilistic Approach to the Response of Tall Buildings to Wind Loadings
Tall buildings constructed in recent years are light in weight, flexible and low in damping. This is the consequence of using lighter material with higher strength, and fewer interior...
Gust Speeds in Hurricanes
Based on strip-chart records of wind speeds representing 11 recording stations and four hurricanes, it is concluded that gust factors for hurricanes generally exceed the gust factors proposed...
Compressive Strength of Large Scale HSLA-80 Steel Cellular Sections of a Double Hull Ship Structure
An analytical and experimental large scale test program was conducted to investigate the instability failure modes of cellular double hull box sections. The main emphasis of the study...
Assessing Effects for Disposal Sites off San Francisco
A simple particle tracking model has been used to estimate the size of deposition footprints and transient turbidity effects in the water column resulting from disposal of dredged material...
Sensitivity of Great Lakes Forecasting System Nowcasts to Meteorological Fields and Model Parameters
The Great Lakes Forecasting System is being developed by the NOAA Great Lakes Environmental Research Laboratory and Ohio State University. It uses meteorological fields as input to a numerical...
The Daytona Beach Large Wave Event of 3 July 1992
The fundamental mechanisms behind the anomalous large wave which struck Daytona Beach on 3 July 1992 are addressed. Although the wave was originally believed to have resulted from a submarine...
The Significance of Hydrodynamic Forces in Coastal Embankment Design
The dynamic forces of sea water and backfill soil acting on coastal embankment are analyzed by using a new finite-difference method. The Euler's equation and continuity equation are used...
Modeling Municipal Water Demands for a Pump Station Area
The Chasewood Pump Station/Residential Area in southwest Houston was selected for a detailed analysis of ground and surface storage water pumping by a University of Houston and City of...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Return to search