Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
The Flow in the Front Stagnation Region of a Square Plate with a Small Disturbing Wire in its Upstream
The flow in the front stagnation region of a square plate was investigated experimentally in a water channel. A small wire was placed in the upstream of the square plate to create a small...
A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Ultrasonic Wave Scattering by a Crack in a Composite Plate
A hybrid method is presented for analyzing ultrasonic wave scattering of plane strain waves by a crack in a composite plate. The hybrid method combines a finite element formulation in...
Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...
Variational Solutions of the Von Karman Plate Theory Based on a Mixed Formulation
A mixed formulation, involving the transverse deflection w(x,y) and the in-plane stress function F(x,y) as the unknown variables, will be used to obtain improved variational solutions...
Numerical and Experimental Studies of Vibration of Impact Damaged SMC Composite Plates
This paper presents a parametric finite element study and an experimental investigation to free vibration of clamped, circular short-fiber reinforced composite plates with various degrees...
Estimation of Pass-By Trips Using a License Plate Survey
The objective of the study was to determine whether it is possible to estimate the percentage of pass-by trips using a license plate survey instead of the traditional interview survey....
Response Variability and Reliability of Plates Using the Weighted Integral Method
A methodology is introduced to perform both the response variability and reliability analysis of two-dimensional stochastic systems (specifically plates subjected to plane stress or plane...
In-Plane Non-Linear Random Vibration of Composite Plates
Filamentary composite structural components used in engineering applications are usually subjected to stochastic loads. Composites have strongly anisotropic properties and display significantly...
Reliability of Degrading Dynamic Systems with Applications
A method is developed for the reliability analysis of degrading systems subject to random excitation. Elasto-plastic systems with degrading stiffness, thin plates with cracks and Daniels...
Reliability Analysis of Plates with Initial Deflection by Entropy Model
Reliability analysis of postbuckling strength is discussed on rectangular plates with initial deflections whose statistical mechanism is estimated by the maximum entropy criteria. Assuming...
Behavior of Concrete-Graphite/Epoxy Sections in Composite Bridge Girders
The focus of this work is on the behavior of composite bridge girders constructed from carbon-fiber-reinforced-plastic sections and concrete slabs. The study examines four-point bending...
Modeling of Floating Ice Sheets
Rectangular finite elements are studied and their suitability to investigate behavior of floating ice sheets is discussed. A simple model of the plate on one parameter, Wrinkler type,...
Buckling Optimization of Laminate Stacking Sequence with Strain Constraints
An integer programming formulation for the design of symmetric and balanced composite laminates subject to buckling and strain constraints is presented. The design variables that define...
Efficient Elements for Mindlin Beams and Plates
Two improvements to the conventional Mindlin two-node beam and three-node plate are presented. The first involves the order of the assumed displacement fields. The second involves simulation...
A New Finite Element Formulation of the Generalized Laminated Plate Theory
The Generalized Laminate Plate Theory (GLPT) predicts stress distributions in laminated composite plates with accuracy comparable to a full three-dimensional analysis. The original implementation...
Advanced Software for Thin Plate Analysis Using Unequally Spaced Cubic B-Splines
A computer program for analysis of thin plates is presented. This package improves upon previous analysis programs by incorporating a proven analytical method in an advanced user interface,...
Hydrodynamic Pressure on an Oscillating Vertical Plate
The hydrodynamic pressure on an oscillating vertical plate could be influenced by the effects of compressibility of fluids and surface waves. The compressibility is effective for higher...
The Moving Contact Line
The flow field around the moving contact line, generated by an impulsive, horizontal motion of a vertical plate, is studied numerically. The two-dimensional, unsteady Navier-Stokes equations,...
Return to search