Seismic Behavior of a Full-Scale K-Braced Steel Frame?Part II Local Behavior
The full-scale six-story concentrically K-braced steel building was subjected to Miyagi-Ken-Oki simulated earthquake whose peak intensity was 500gal. Local behavior of the test building...

Building Identification: Needs and Means
The need to conduct 'system identification' of existing buildings by nondestructive testing is discussed. A recommended flow-chart is exemplified. Existing dynamic...

Slab Participation in Frames under Lateral Loads
A unique opportunity to study slab participation was afforded by the U. S. -Japan Cooperative project on large scale testing. The data obtained from the full-scale 7-story building tested...

Earthquake Response Simulation Capacity of Pseudo Dynamic Testing?Experimntal Demonstration and Analytic Evaluation
The response accuracy of the pseudo dynamic test was evaluated from the shake table and pseudo dynamic tests conducted for a two story steel braced frame model. The obtained responses...

Evaluation of Seismic Strengthening of an Existing Building Using Base Isolation
This paper summarizes a study performed by Englekirk and Hart, Inc. to evaluate the feasibility of using base isolation to seismically upgrade an existing highrise building. To realize...

Dynamics of 3-D Base Isolated Structures
The work described in this paper concerns the dynamic behavior of asymmetric base isolation systems consisting of laminated rubber bearings and hysteretic dampers. It is shown in this...

The Earthquake Barrier
The earthquake barrier protects buildings from the horizontal ground vibrations of an earthquake by installing a 'force barrier and an energy barrier' at the...

Earthquake Response of Five Story Reinforced Concrete Masonry Test Building
In 1986, a full-scale five story reinforced masonry test building is to be constructed in the Japan Building Research Institute Large-Scale Structure Test Laboratory, and through 1987...

Full Scale Tests of Cladding Components
A full scale, six story, steel frame at the Building Research Institute, Tsukuba, Japan was constructed for a series of projects in the U. S. -Japan Cooperative Research Program. This...

System Identification Applied to Pseudo-Dynamic Test Data: A Treatment of Experimental Errors
A single-input single-output system identification technique, used to estimate the modal properties of a full-scale six-story steel structure tested within its elastic range by the pseudo-dynamic...

Adaptation of Modal Testing Procedure to Shaker Tables
This article presents a technique for adapting current modal testing procedures to shaker table tests commonly used for qualification tests of nuclear and space related equipment. It involves...

Problems of Spectral Analysis in Dispersion Tests
The use of dispersive surface waves and spectral analysis methods is new to the nondestructive testing of airfield pavements. Such tests are to determine whether mechanical properties...

Stiffness Parameters Identification of Frames
Four widely used methods of structural system identification are presented. A new formula and its derivation, based on the Bayesian estimation theory, is given. Time domain responses of...

Optimal Collection of Data for Parameter Identification
In this paper, the author attempts to study the optimal spacing of measurements for a structural system modelled by a single-degree-of-freedom oscillator so that the variance of one or...

Research Topics in Structural Identification
The authors examined a variety of possible research topics including identification and detection of nonlinearities, model improvement approaches, damage identification, power estimation...

A Discrete Model for the Estimation of the Elastic Abutment Stiffness
The purpose of this paper is the presentation of a simple method for the estimation of the abutment stiffness. In this method, the abutment is represented as a uniform rigid plate with...

Dynamic Soil-Structure Interaction for RC Lifelines
The behavior of buried cylinders merits attention because of the impact of lifeline survivability under earthquake effects, and failures may adversely affect many communities that employ...

Green's Function Implementation for Pile Analysis
This paper describes the implementation of a new Green's function based on a layer stiffness approach in a boundary element analysis of harmonically loaded pile groups embedded...

Soil-Structure Interaction on Structural Dynamics
The dynamic analysis of structures under the effect of soil-structure interaction and the effect of member axial force is based on the continuous mass matrix method, in which the equations...

Comparative Seismic Response of Damped Braced Frames
The behaviours of braced steel building frames with friction joints and with eccentric bracing, under seismic forces, are compared. Nonlinear time history dynamic analysis is used. Friction...

 

 

 

 

Return to search