Design of Offshore Pipelines for Ice Environments
Design and installation of offshore pipelines in cold regions requires special care. Low ambient temperatures may cause increased friction losses in oil and gas lines due to wax crystallization...
Design of Bridges for Ice Forces
Sources of knowledge on ice forces and ice effects on bridges are listed and discussed briefly. Comments are made on experience of damage by ice and on the influence on bridge costs of...
Design of Navigational Structures for Ice Forces
An overview of ice conditions and the types of ice action that are hazardous to navigational structures is presented. Depending on the circumstances, ice failure against structures occurs...
Design of Submerged and Floating Structures
The objective of this paper is to present an overview of the state-of-the-art of ice engineering as applied to submerged and floating structures. Five specific design studies are reviewed,...
The Role of the Civil Engineer in Highway Safety
The papers included in this publication focus on the current state-of-the-art of highway safety and the civil engineer's role in confronting and solving highway safety problems....
The Incidence, Monitoring, and Treatment of Viruses in Water Supply Systems
A State-of-the Art Review
Two areas of growing concern in water treatment and public health are the potential for spread of viruses by water routes and the adequacy of current treatment and disinfection practices...
In Search of Ancient Engineers
Many examples of pre-Columbian civil works have been uncovered in North and South America. Some reflect well-organized technologies comparable to those of the Old World of the same time...
Structural Steel Details: Is Responsibility a Problem?
Because structural engineers are leaving design of structural steel connections to fabricators, the problem of responsibility for those details has arisen. This article explores a variety...
Labor-Contractor Dialogue Transforms Worksite Atmosphere
In a climate of three-way communication between management, contractors and labor, the project owner saved money, increased productivity, cut down on time off the job for illness and injury...
Pile Construction Practices in Arctic Regions: State-of-the-Art
Pile installation techniques in cold regions include drill and slurry, and driven methods for foundation designs. In the past, piles used for structural support in permafrost have consisted...
Cold Regions Safety
Presented here are some essential basics for the development of a comprehensive cold regions safety program. The intent is to cover a few topics in some detail, and to increase the general...
The Civil Engineer and the Decay of America's Infrastructure
With the infrastructure of the United States continuing to deteriorate, the problem becomes who will decide how much to spend in both repairing, maintaining and building new facilities...
Passive Solar and Daylighting Cut Building's Energy Use
The headquarters building for Gulf Mineral Resources Co. near Denver requires about one-quarter of the energy generally used in a new conventional building. A double skin provides a thermal...
Frame Program
A plane frame program for structural analysis that is short to program and easy to understand is presented. Included inl article is a complete print-out of the program with a step-by-step...
Oil Rigs Designed to Combat Arctic Ice
Exploration and drilling rigs now being designed for use in the Beaufort Sea must withstand ice forces never before encountered. Design approaches include using the geometry of these structures...
Existing Sewer Evaluation and Rehabilitation
Guidlines for the evaluation and rehabilitation of sanitary sewers are presented. The purpose and scope of sanitary sewer rehabilitation is described. The major emphasis is on filtration...
Mechanical Fastening of Structural Wood Members?Design and Research Status
A brief overview is provided of the current mechanical fastening research base as background for a discussion of future research needs and priorities. A summary is presented of the current...
Structural Analysis of Light-Frame Subassemblies
Conventional light-frame subassemblies have a long history of good performance. Until recently this performance could not be quantified adequately because of the complex ways in which...
Heavy Timber Structures and Bridges
Development and application of treated glued-laminated timber is a landmark event in structural engineering history. The inertia of this event has produced continued, rapid and dramatic...
An Overview of Structural Panels and Structural Composite Products
Plywood has been the principal structural panel for construction since the late 1940s. Today, structural panels are evolving into products such as composite panels, oriented strand board,...
Return to search