Shop Creek Stormwater Quality Enhancement Project
The advent of NPDES regulations for stormwater discharges creates a need to verify, on a regional basis, the effectiveness of emerging water-quality control technologies such as extended...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...
Modification to John H. Overton Lock and Dam
The Red River Waterway Project, Mississippi River to Shreveport, Louisiana, will consist of a navigation channel 9 feet (2.7m) deep by 200 feet (61.0m) wide, 5 locks and dams providing...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
The Method of Lines Solution of Unsteady Open Channel Flow Equations Along Characteristics
The method of characteristics (MOC) has long been considered as a natural procedure for solving transient flow problems. In this paper, by using the concept of the method of lines, the...
Kinematic Wave Based Hydrologic Models with Different Solution Methods
The hydrologic simulation models RUNOFF and HEC-1 are applied to a 3212-ha watershed in New Jersey, and performances of the two models in predicting historical stromwater hydrographs from...
Paleoflood Hydrology and Design Decision for High-Risk Projects
Paleoflood hydrology is not merely one of several alternative methods for risk-based design. Rather, certain kinds of accurate data on the largest paleofloods of recent millennia provide...
Comparison of Correction Factor for Dispersion Coefficient Based on Entropy and Logarithmic Velocity Profiles
Recently, new velocity distribution equations have been developed by Chiu (1987, 1989) through the use of maximum entropy principle. A comparison will be made of the correction factor...
Numerical Modeling of a Trench Fill and Scour
The sediment fill and scour in a dredged trench was numerically simulated by the nodal-collocation finite element method and an explicit scheme. The one-dimensional unsteady sediment-laden...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
Urban Stormwater Management Practices: Concepts and Misconceptions
A variety of methods are practiced for the management of urban stormwater runoff. These include detention basins/ponds, retention basins, infiltration basins, and seepage pits. This paper...
A Generalized Diffusion Wave Flood Routing Model
A generalized diffusion wave model for flood routing is presented. The model can incorporate detailed data on natural cross sections and river bed geometry. An accurate numerical method...
A Multimode Scheme of Characteristic Method for Open Channel Flows
This paper deals with the stability and accuracy of a multimode scheme, based on the method of characteristics, for unsteady one-dimensional open-channels flows. This scheme combines three...
Hermite-Galerkin Model for Dam-Break Floods
A model based on the finite element method using cubic Hermite basis functions and Galerkin weighting was formulated to solve the partial differential equations that govern unsteady one-dimensional...
An Expert Advisor for Selective Withdrawal Operations
A rule-based computational advisor that aids in the selection of selective withdrawal operations for project release temperature maintenance is discussed. This advisor couples a one-dimensional...
Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...
Two-Dimensional Finite Element Simulation of the Flooding Characteristics in Kawainui Marsh, Hawaii
This paper summarizes the results from the calibration and application of a two-dimensional finite element model capable of simulating the complex circulation characteristics of Kawainui...
Application of Weakly Compressible Flow Method to 2-D Open Channel Flows
The depth averaged equations for open channel flows are shown to be similar to that of the weakly compressible flows. The finite volume scheme developed for weakly compressible flows has...
Return to search