Repair Welding of Arctic Offshore Structures and Vessels
This paper describes the welding procedure development for repair or field modifications of offshore drilling structures and vessels made with several different steel grades produced for...
Finite Element Modelling of Cold Regions Concreting
Finite element heat transfer computer programs are discussed in regard to their use in modelling cold weather concreting. The concrete material properties required for input to the finite...
F.E.M. Analysis of Mobile Arctic Caisson Island With Stochastic Material Properties
The paper examines how soil uncertainty influences the short term settlements and stresses of the Mobile Arctic Caisson on the original sea bed. Utilizing a two-dimensional plane strain...
Geomembrane Liner Performance in the Arctic
A geomembrane liner must be selected not only on the basis of its chemical compatibility with the substance to be contained, but also on the basis of its physical performance characteristics...
The Transport of Crude Oil Under Saline Ice
A mathematical model was developed to describe the forces acting on an oil slick under saline ice in the presence of a water current. The model was verified through a set of laboratory...
Moisture Effects on Extruded Polystyrene Insulation
The amount of moisture within the insulation was determined by carefully weighing each sample and then measuring its volume. Two methods of measuring thermal conductivity were used. The...
The Evolution of a Factory Insulated Piping System
This paper reviews the developments over the past fifteen years in a factory insulated high density polyethylene piping system that has become a standard for sewage and water piping systems...
Insulation Performance Beneath Roads and Airfields in Alaska
Evaluations of the long-term thermal performance of installations in Alaska for frost heave control have included sampling and testing of the insulations to determine the retained thickness,...
Wave Forces on an Arctic Monotower Platform
At offshore lease sites located along the western coast of Alaska, longer periods of open water can be expected. As a result, wave induced hydrodynamic loading will become a more significant...
Upper Delaware River Ice Control?A Case Study
During February 1981 a castastrophic breakup ice jam occurred along a reach of the Delaware River near Port Jervis, NY, causing 14. 5 million in damages. In February 1982 another breakup...
Applications of Artificial Intelligence in Preliminary Structural Design
The field of Artificial Intelligence (AI) deals with the problems of modeling human intelligence. The application of AI to structural engineering has been limited, but potential applications...
Finite Element Analysis of Concrete Armor Units Subject to Wave Impact
Concrete armor units are commonly employed for the protection of shorelines and rubble structures. Their design is primarily based on hydrodynamic stability. However, their structural...
Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...
Broke2: A Program for Broken Wire Analysis
A computer program to study the dynamic behavior of an electric transmission line system when wires suddenly break has been developed by the authors. All three of the line elements: the...
Spring Stiffness for Beam-Column Analysis of Soil-Structure Interaction Problems
The objective is to provide a simple means of analytically combining a two-dimensional foundation with a beam-column structure so that the procedure can be used for preliminary design...
Dynamics of Machine Foundation
The art of designing machine foundations, supporting vibratory load has changed from the approximate rule-of-thumb to the scientifically sound engineering procedure. However, the vast...
Interactive Analysis and Design Program for Girder Bridges
An interactive microcomputer program for the analysis, design, and rating of girder bridges is presented. The program, GBRIDGE, is user-friendly, menu-driven, and developed in modular...
Optimal Design of Continuous Prestressed Concrete Girders
Design of continuous prestressed concrete girders with possibility of parabolically varying depth in each span is formulated in the form of a mathematical programming problem. The design...
Heterosis Shell Element in GTSTRUDL
The most popular shell finite element is the degenerated solid type, originally formulated to model thick shells. However, in thin shell applications, this element fails by 'locking'....
Dynamic Soil-Structure Interaction by the Boundary Element Method: A Comparison Study
A comparison study of three Boundary Element Method approaches is attempted on the basis of a typical three-dimensional, dynamic soil-structure interaction problem. The vertical transient...
Return to search