Modeling of Surface Vortices in Unsteady Flow
Hydraulic model studies of lock filling and emptying systems include investigating vortex tendencies at the intake vincinity during filling. The flow at the intake vicinity is unsteady...
A Branched Mass Transport Model of the Sacramento-San Joaquin Delta, California
A new branched mass (salt) transport model is used to simulate salt transport in the Sacramento-San Joaquin Delta, California. The model uses a two-step procedure to determine the salt...
A Computational Analysis of Dynamic Interaction of Dam with Reservoir Water and Sediment
A two-dimensional model of porous media is employed to calculate the reduction of the onset hydrodynamic pressure with the bulk modulus of pore water in reservoir sediment. However, the...
Physical Modeling Study of the Niagara River Plume
A rotating laboratory facility is used to study the dynamics of the Niagara River discharge into Lake Ontario. The current tests are limits to buoyant discharge conditions, which occur...
CORMIX2: Expert System for Multiport Diffuser Discharges
The Cornell Mixing Zone Expert System (CORMIX) is a series of software systems for the analysis, prediction, and design of aqueous toxic or conventional pollutant discharges into watercourses,...
Effect of Temperature on Settling of Fine Sediments
Results from settling experiments in an annular flume using kaolinite clay in distilled water are presented. Identical experiments carried out at different temperatures show that as temperature...
A Hybrid Model for Sediment Concentration Profiles
The paper discusses the deficiency in the existing theories on suspended concentration profiles which is due to the variations of theories for modeling the velocity profiles. As can be...
A Fractal Concept in Stream, Swale, and Sheet Flow
The concept of fractals, in simple terms, says that the patterns of natural features repeat themselves as the feature gets divided into successively smaller segments. In this paper, the...
Uncertainty of Runoff Volume as a Function of Rainfall and Catchment Characteristics
The expected variability of runoff volume due to the uncertainties in spatial distribution of rainfall and catchment characteristics is quantified. A physically-based mathematical model...
Example of the Stable Channel Design Approach
This paper shows an example application of a new method being packaged by the US Army Engineer Waterways Experiment Station to aid in the design of stable flood-control channels. A stable...
Stable Channel Analytical Design Method
The Flood-Control Channels Research Program is being conducted at the US Army Engineer Waterways Experiment Station to develop systematic methods for design of stable channels for small...
Guidance on the Selection and Use of Sediment Discharge Formulas
The purpose of this paper is to discuss the sediment function module of the computer program SAM. SAM is being developed as a product of the US Army Corps of Engineers Flood Control Channels...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Weibull Distribution and Natural Hydrograph
For design projects in water resources, a hydrograph is commonly used for the determination of flood volume generated by a given drainage basin. The division of total flow into direct...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
Maximum Scour Below Dams Caused by Over-Fall Flow
The scour of sediment below a check dam caused by over-fall flow will lead to the destruction of dams. The formation of the scour hole below the dam will lead to shorten the seepage lines,...
Variational Method in Fluvial Hydraulics?A Review
The theoretical base of the principle of minimum energy dissipation rate and other related stationarity hypotheses have been reviewed. Recent applications of the theory to the calculation...
Introduction of Variational Principle Into Open Channel Hydrodynamics
Possible applications of the variational principle maximizing the entropy are illustrated. Open channel flow properties are expressed in terms of 'entropy parameter',...
Physical Modelling of Self Forming Alluvial Channels
A method is presented for the determination of a practicable physical model of self-forming channels in cohesionless alluvium. Both sand bed and gravel bed regime channels are considered....
Mt. Elbert Pumped Storage Trashrack Failure
The failure of three trashrack sections for unit 2 at the suction-draft tube intake occured after one year in service. However, the trashracks for unit 1 had five years of service with...
Return to search