Measuring the Spatial Characteristics of Unsteady Pressures
This paper has reviewed current methods of determining spatially-averaged time-varying wind loads on wind tunnel building models. Some of the possibilities opened by simultaneous multi-channel...
The Application of Aerodynamic Model Tests to Wind Loading of Tall Buildings
The theory of the aerodynamic model test, in which the wind response of tall structures can be computed for a range of dynamic properties from a measurement of the external wind load,...
Wind Forces Measured on a Tall R.C. Chimney
This paper describes some aspects of an analysis performed on measurements of a variety of parameters relating to the wind, wind forces on and the response of a tall chimney. The results...
Research Needs to Resist Terrorist Attacks
The task of protecting facilities against terrorist attacks is very much a new problem for the U. S. civilian sector. Guidance as to what steps need to be taken by a municipality or a...
Improved Design Procedure for Shallow-Buried Structures to Resist Airblast Loading
Both conventional and nuclear weapons generate airblast loads of sufficient magnitude that structure survival at acceptable cost favors below grade construction. The design of shallow-buried...
Suspended Polycarbonate Shield to Defeat Terrorist Threats
The Navy Civil Engineering Laboratory is conducting research on a window concept that offers great potential for overcoming the disadvantages of blast resistant windows. The concept is...
Response Charts for Designing Against Nuclear Overpressures
The single-degree-of-freedom equation of motion for an elastic-plastic system with a nuclear airblast overpressure forcing function is nondimensionalized and solved. Solutions are presented...
Limiting Performance and Design by Reanalysis of Structures for Blast Resistance
Limiting performance is the absolute optimal response of a structure under a specified transient load. Reanalysis methods are computational techniques for analyzing locally modified large-scale...
Drop Test of Dolos Armor Units
Dolosse are concrete armor units used for the cover layer on many breakwaters and jetties. In order to study their complex loads and structural response, a prototype study at Crescent...
Fault Identification by Seismic Impact Load Techniques
The propagation of seismic waves generated by impact loading across a normal fault in carbonate rock was investigated by the seismic refraction technique. The field records were reduced,...
Wind-Induced Response of a Tall Building and Comparisons With Wind Tunnel Predictions
This paper describes the measured wind-induced response of a tall office tower and comparisons made with wind tunnel studies of the building. The use of an innovative structural system...
Simulation Algorithms for Offshore Structures
A rational procedure for characterization of water depths for a random sea state is developed, in context with linearized wave theory. The importance of using the expressions for 'intermediate...
Time Domain Structural Parameters Identification
Identification techniques for linear lumped-parameters models of vibrating structures are critically assessed using data produced by numerical simulations. The structural model is excited...
Anchorage Forces for Z-Purlin Supported Standing Seam Roof Systems
This paper presents the results of a limited study to determine if the provisions of Section D. 3. 2. 1 'Anchorage Bracing for Roof Systems Under Load with Top Flange Connected...
Rational Design Approach for Tension on the Net Section
A study of the bearing and net section capacities of bolt connections for material thicknesses encountered in cold-formed members was conducted. This paper summarizes the findings as they...
Stability and Limit Loads of Steel Space Trusses
An investigation of the behavior of cold-formed steel space truss structures, under the interaction of local, member, and overall buckling is described. A Finite Element computer program...
Flexibly Connected Thin-Walled Steel Frame Response
The static response of flexibly connected plane frames composed of thin-walled steel members is presented. Analysis capabilities include post-local-buckling strength and elastic semi-rigid...
Buckling of Thin-Walled Members by p-Version of FEM
P-Version of the finite element method (FEM) is used for one-D and three-D modeling of thin-walled open sections and axial compressive load. Equal angle and channel sections are used for...
Bending Strength of Thin Cold-Formed Steel Straight Panels
An experimental investigation on the bending strength of 26 gage cold-formed corrugated steel straight panels with web-depth to thickness (h/t) ratio of 475 is presented. A typical test...
Multiple Bolt Row Moment End-Plates
This paper presents a portion of the results of a study to develop design procedures for the extended, multiple row, moment end-plate configuration. This configuration is used in steel...
Return to search