Design of Deer Creek Dam
The Deer Creek Dam is proposed to be a concrete face rockfill structure (CFRD) with upstream and downstream slopes nominally 1. 3 horizontal to 1 vertical. The embankment will rise 280...
Rockfill Compression Tests and Other Aspects of the Design of Miel I Dam
The Miel I Dam, a high concrete face rockfill dam, is one of the main structures designed for the Miel I Hydroelectric Project in Colombia. Selection of dam type was based on technical...
Machadinho Dam in Brazil
This paper presents the reasons for selection of a concrete-face rockfill dam for Machadinho Hydroelectric Project in Brazil. It also describes the main characteristics of the dam, as...
The Design of Macagua Concrete Face Rockfill Dam
This article describes the design characteristics of the concrete face rockfill dam at Macagua, which will have a total length of about 9,200 ft (2,800 m), an average height of 66 ft (20,0...
Low Cement Content High Strength Concrete
The fundamental objective of this research project was to develop mix design information for structural grade concrete using high fly ash content. The fly ash used in this project was...
Advances in Fiber Reinforced Concrete
The idea of using strong discontinuous fibers as reinforcement for concrete seems to have been both a seduction and a challenge to many civil engineers. Adding the reinforcement to the...
Foundation Design Considerations for Detroit DPM
The design loadings for support of the elevated guideway of the Detroit Downtown People Mover (DPM) consist of high vertical as well as horizontal loads. In order to simplify foundation...
Rational Design of Beam-Columns in Steel
The paper discusses the procedure as currently recommended in the AISC Manual for selection of beam-columns in steel and points to the inadequacy of this procedure for quick convergence...
Unsymmetrically Reinforced Concrete Columns
The development of column strength formulas for unsymmetrically reinforced sections has been developed in previous papers. However, aids such as interaction diagrams have not been available...
Towards Rational Design of Structural Members in Reinforced Concrete
With the increasing emphasis on cookbook designs, plug-in and punch-in formulas, and punch-in numbers in the personal computer program, there is a danger that the designer may accept the...
A Summary of the Seismic Qualification Utilities Group (SQUG) Program
In December of 1980, the Nuclear Regulatory Commission (NRC) initiated Unresolved Safety Issue (USI) A-46 to address the question of the seismic adequacy of equipment in 49 operating nuclear...
Obtaining Reliable Data from Fragility Tests
The parameters discussed in this paper are the same as those present in normal seismic qualification testing. These parameters behave differently in high level acceleration tests and their...
Earthquake Experience Data on Power and Industrial Structures: Applications to Seismic Design and Evaluation
An extensive study was conducted to document the seismic performance of typical power plant and industrial structures in selected recent strong earthquakes and to correlate the performance...
Aseismic Capability Prediction from Failure Data
Forensic engineering evaluations of failures have produced a wealth of technical data. In this paper, evaluation of representative failure data from one practitioner provided relevant...
Impact on Test by Various Multiaxis Excitation
The purpose of this paper is to provide input guidelines in evaluating various types of multiaxis excitation on fragility level testing of electronic devices. There are many variables...
Seismic Design-Qualification of Non-Safety Related Items in Safety Related Envelope
This presentation pertains to Seismic Design-Qualification for those portions of structures, systems, or components in a Nuclear Plant whose continued function is not required but whose...
Design of Cirata Concrete Face Rockfill Dam
The Cirata Hydro-Electric Project on the Citarum River in Western Java, Indonesia is at present under construction for Perusahaan Umum Listrik Negara (PLN). The project which is being...
On-Line Color Graphics for Demand-Responsive Scheduling
Scheduling and dispatching a fleet of vehicles to respond to ongoing requests for transportation to and from various points in an urban area can be a complex proposition. Human controllers...
Graphics-Based Transportation Modelling with DIME/GADS/NEDS
Graphics helps analysts, policy-makers and the public understand the inter-relationships of land use patterns and transportation systems. A suite of graphics-based programs provide a decision-support...
Long Range Element Update in Duluth, Minnesota
This paper discusses the use of microcomputer transportation planning software packages to update the Long Range Element of the Duluth-Superior Metropolitan Area Transportation Plan. Two...
Return to search